Access point Aruba JZ172A

UNIQUE BENEFITS

• Dual Radio 802.11ac access point with Multi-User MIMO
  • Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 300 Mbps in the 2.4 GHz band (with 2SS/HT40 clients).
• Built-in Bluetooth Low-Energy (BLE) radio
  • Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.
• Advanced Cellular Coexistence (ACC)
  • Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/femtocell equipment.
• Industrial design for harsh indoor and outdoor environments
  • Sealed connector interfaces to lock out dust and moisture
• Quality of service for unified communication apps
  • Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat, and desktop sharing.
• Best-in-class RF management
  • Integrated AirMatch technology manages the 2.4-GHz and 5-GHz radio bands and actively optimizes the RF environment including channel width, channel selection and transmit power.
• Spectrum analysis
  • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
• Wireless mesh
  • Wireless mesh connections are convenient where Ethernet drops are not available.
• Intelligent app visibility and control
  • AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for 1,000's of enterprise apps or groups of apps.
• Aruba Secure Core
  • Device assurance: Use of Trusted Platform Module (TPM) for secure storage of credentials and keys as well as secure boot
  • Integrated wireless intrusion protection offers threat protection and mitigation and eliminates the need for separate RF sensors and security appliances.
  • IP reputation and security services identify, classify, and block malicious files, URL and IPs, providing comprehensive protection against advanced online threats.
  • Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources.

CHOOSE YOUR OPERATING MODE

• As unified APs, the Aruba 370 Series can be deployed with or without a controller and can be readily switched to accommodate changing network needs.
  • Controller mode: When managed by Aruba Mobility Controllers, Aruba 370 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding or,
  • Controllerless (Instant) mode: In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – Instant Network.
• Other functional modes include:
  • Remote AP (RAP) mode for branch deployments
  • Air monitor (AM) for wireless IDS, rogue detection and containment
  • Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
  • Secure enterprise mesh
  • Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis

For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Unified APs are factory-shipped to any site and configure themselves when powered up.

AP-370 SERIES SPECIFICATIONS

• AP-374
  • 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
    • Four Nf connectors for external antenna operation
  • 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
    • Two Nf connectors for external antenna operation at 2.4 GHz
• AP-375
  • 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
    • Internal Omni Antennas 4.6 dBi
  • 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
    • Internal Omni Antennas 4.0 dBi
• AP-377
  • 5 GHz 802.11ac 4x4 MU-MIMO (1,733 Mbps max rate)
    • Internal 80°H x 80°V Directional Antennas 6.3 dBi
  • 2.4 GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios
    • Internal 80°H x 80°V Directional Antennas 6.4 dBi

WI-FI RADIO SPECIFICATIONS

• AP type: Outdoor hardened, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 2x2 MIMO
• Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
• 5 GHz:
  • Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
  • Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices
• 2.4 GHz:Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
  • Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2x2 HT40 client devices
• Supported frequency bands (country-specific restrictions apply):Available channels: Dependent on configured regulatory domain.
  • 2.400 to 2.4835 GHz
  • 5.150 to 5.250 GHz
  • 5.250 to 5.350 GHz
  • 5.470 to 5.725 GHz
  • 5.725 to 5.850 GHz
• Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.
• Supported radio technologies:
  • 802.11b: Direct-sequence spread-spectrum (DSSS)
  • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• Supported modulation types:Transmit power: Configurable in increments of 0.5 dBm
  • 802.11b: BPSK, QPSK, CCK
  • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Maximum (conducted) transmit power (limited by local regulatory requirements):
  • 2.4 GHz band: +22 dBm per chain, +25dBm aggregate (2x2)
  • 5 GHz band: +22 dBm per chain, +28dBm aggregate (4x4)
  • Note: conducted transmit power levels exclude antenna gain.
• Maximum EIRP (limited by local regulatory requirements):Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.
  • 2.4 GHz band:
    • 374: 25 + Antenna Gain
    • 375: 29 dBm EIRP
    • 377: 31.4 dBm EIRP
  • 5 GHz band:
    • 374: 28 + Antenna Gain + TxBF Gain
    • 375: 35.6 dBm EIRP
    • 377: 36 dBm EIRP
• Maximum ratio combining (MRC) for improved receiver performance.
• Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance.
• Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels.
• Space-time block coding (STBC) for increased range and improved reception.
• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.
• Transmit beam-forming (TxBF) for increased signal reliability and range.
• Supported data rates (Mbps):802.11n high-throughput (HT) support: HT 20/40
  • 802.11b: 1, 2, 5.5, 11
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
  • 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
  • 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31)
  • 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
• 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
• 802.11n/ac packet aggregation: A-MPDU, A-MSDU

POWER

• Worst-case power consumption from the AP: 23W
• Power sources sold separately
• Power over Ethernet (PoE+): 802.3at-compliant
• AC Power: 100-240 Volt 50/60Hz AC
  

OTHER INTERFACES

• One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)One 1000BASE-X SFP Port
  • Auto-sensing link speed and MDI/MDX
  • 802.3az Energy Efficient Ethernet (EEE)
• Bluetooth Low Energy (BLE) radioVisual indicator (multi-color LED): For system and radio status
  • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
• Reset button: Factory reset (during device power up)
• Micro USB console interface
• Kensington security slot
  

MOUNTING

• AP-270-MNT-V1
• AP-270-MNT-V2
• AP-270-MNT-H1
• AP-270-MNT-H2
  

MECHANICAL

• AP-374
  • Dimensions/weight with aesthetic cover (excluding mount):
    • 23 cm (W) x 24 cm (D) x 19 cm (H)
    • 9.0" (W) x 9.4" (D) x 7.5" (H)
    • 2.7 kg / 6 lbs
  • Dimensions/weight without aesthetic cover (excluding mount):
    • 23 cm (W) x 24 cm (D) x 14 cm (H)
    • 9.0" (W) x 9.4" (D) x 5.5" (H)
    • 2.4 kg / 5.3 lbs
• AP-375
  • Dimensions/weight (excluding mount):
    • 23 cm (W) x 24 cm (D) x 27 cm (H)
    • 9.0" (W) x 9.4" (D) x 10.6" (H)
    • 2.4 kg / 5.3 lbs
• AP-377
  • Dimensions/weight (excluding mount):
    • 23 cm (W) x 22 cm (D) x 13 cm (H)
    • 9.0" (W) x 8.7" (D) x 5.1" (H)
    • 2.1 kg / 4.6 lbs

ENVIRONMENTAL

• Operating:
  • Temperature: -40° C to +65° C (-40° F to +149° F)
  • Humidity: 5% to 95% non-condensing
• Storage and transportation:Operating Altitude: 3,000 m
  • Temperature: -40° C to +70° C (-40° F to +158° F)
• Water and Dust
  • IP66/67
• Salt ToleranceWind Survival: Up to 165 Mph
  • Tested to ASTM B117-07A Salt Spray 200hrs
• Shock and Vibration ETSI 300-19-2-4
  

REGULATORY

• FCC/ISED
• CE Marked
• RED Directive 2014/53/EU
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

REGULATORY MODEL NUMBERS

• AP-374: APEX0374
• AP-375: APEX0375
• AP-377: APEX0377
  

CERTIFICATIONS

• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi Alliance certified 802.11a/b/g/n
• Wi-Fi CERTIFIED™ ac (with wave 2 features)
  

WARRANTY

Aruba limited lifetime warranty

MINIMUM SOFTWARE VERSIONS

• ArubaOS & Aruba InstantOS 8.3.0.0