Access point Cisco C9105AXW-E

SKU

C9105AXW-E

Skip to the end of the images gallery

Skip to the beginning of the images gallery

€491.40

EAN: 17690

Stock: available on order

Lead time: 25-35 days

GPL price:

702 $

Cisco Catalyst 9105AX Series-Wallplate

Category: Cisco Wireless

Details

Cisco Catalyst 9100 – an innovative series of corporate Internet access points that are equipped with state-of-the-art hardware and support modern patented technologies and methods Cisco.

Units of this level are profiled for modern high-tech firms and enterprises that value a high level of performance and safety..

Line of new hotspots Cisco Catalyst 9100 represented by the following models: Catalyst 9115, Catalyst 9117 And Catalyst 9120.

access point Catalyst 9115 – is a unique device based on 6-1st generation WI-FI or 802.11Oh, which provides a triple increase in the speed of receiving and transmitting an Internet signal.

Peculiarities

Simultaneous operation on all frequencies
Multi-gigabit network interface
New power-saving mode extends battery life
Technology support Trust Anchor, guaranteeing the authenticity of software and hardware
Certification WIFI 6
Three radio modules: 2,4 GHz, 5 GHz And Bluetooth Low Energy (BLE) 5.0
Support OFDMA And MU-MIMO 4x4

Catalyst 9117 – enterprise-class wireless access point, it has a multi-gigabyte interface and supports frequency division technology OFDMA And MU-MIMO 8x8. In addition, the access point is equipped with three radio modules and supports up to five thousand connected clients..

Peculiarities

Simultaneous operation on all frequencies
Multi-gigabit network interface
New power-saving mode extends battery life
Technology support Trust Anchor, guaranteeing the authenticity of software and hardware
Certification WIFI 6
Three radio modules: 2,4 GHz, 5 GHz And Bluetooth Low Energy (BLE) 5.0
Support OFDMA And MU-MIMO 8x8

Catalyst 9120 – the most progressive model among all access points based on a new data transfer protocol WI-FI 6. The model is equipped with 4 radio modules and is produced with both internal and external antennas..

Peculiarities

Certification WIFI 6
Four radio modules: 2,4 GHz, 5 GHz, 5 GHz (dedicated radio module) And Bluetooth Low Energy (BLE) 5.0
Support OFDMA And MU-MIMO 8x8
Simultaneous operation on all frequencies
Multi-gigabit network interface
New power-saving mode extends battery life
Technology support Trust Anchor, guaranteeing the authenticity of software and hardware

Access Point Specifications Cisco C9105AXW-E:

Software	- Cisco Unified Wireless Network Software Release 8.10.MR3 or later - Cisco IOS XE Software Release 17.3.1, or later
Supported wireless LAN controllers	- Cisco Catalyst 9800 Series Wireless Controllers - Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	- 2x2 MIMO with two spatial streams - Maximal Ratio Combining (MRC) - 802.11n and 802.11a/g - 20- and 40-MHz channels - PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) - Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) - 802.11 Dynamic Frequency Selection (DFS) - Cyclic Shift Diversity (CSD) support
802.11ac	- 2x2 downlink MU-MIMO with two spatial streams - MRC - 802.11ac beamforming - 20-, 40-, 80- MHz channels - PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) - Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) - 802.11 DFS - CSD support - WPA3 support
802.11ax	- 2x2 uplink/downlink MU-MIMO with two spatial streams - Uplink/downlink OFDMA - TWT - BSS coloring - MRC - 802.11ax beamforming - 20-, 40-, 80- channels - PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) - Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) - 802.11 DFS - CSD support - WPA3 support
Integrated antenna	- 2.4 GHz: Peak gain 3 dBi, internal antenna - 5 GHz: Peak gain 5 dBi, internal antenna
Interfaces	- 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface - 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) - Management console port (RJ-45) - USB 2.0 at 4.5W - Passthru Port
Indicators	Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)
Weight	0.8 lb. (373.2g)
Input power requirements	- 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®) - Cisco power injector, AIR-PWRINJ6= - 802.3af PoE - Cisco power injector, AIR-PWRINJ5=
PoE power	- 802.3af (PoE) - 802.3at (PoE+): Either USB or LAN1 PSE enabled.
Link speed	- 2.5G mGig
Environmental	- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) - Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) - Operating temperature: 32° to 122°F (0° to 50°C) - Operating humidity: 10% to 90% (noncondensing) - Operating altitude test: 40˚C, 9843 ft.(3000 m)
Available transmit power settings (Max/Min)	- 2.4 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) - 5 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW)

Reviews

Product Attachments

Access point Cisco C9105AXW-E

Real email address is required to social networks

Log In