Access point Cisco CW9164I-E

SKU
CW9164I-E
€1,466.33
EAN: 17686
Condition: new
Stock: available on order
Lead time: 25-35 days
GPL price:

2205 $

Catalyst 9164I AP W6E tri-band 4x4 wReg-E

Cisco Catalyst 9100 – an innovative series of corporate Internet access points that are equipped with state-of-the-art hardware and support modern patented technologies and methods Cisco.

Units of this level are profiled for modern high-tech firms and enterprises that value a high level of performance and safety..

Line of new hotspots Cisco Catalyst 9100 represented by the following models: Catalyst 9115, Catalyst 9117 And Catalyst 9120.

access point Catalyst 9115 – is a unique device based on 6-1st generation WI-FI or 802.11Oh, which provides a triple increase in the speed of receiving and transmitting an Internet signal.

Peculiarities

  • Simultaneous operation on all frequencies
  • Multi-gigabit network interface
  • New power-saving mode extends battery life
  • Technology support Trust Anchor, guaranteeing the authenticity of software and hardware
  • Certification WIFI 6
  • Three radio modules: 2,4 GHz, 5 GHz And Bluetooth Low Energy (BLE) 5.0
  • Support OFDMA And MU-MIMO 4x4

Catalyst 9117 – enterprise-class wireless access point, it has a multi-gigabyte interface and supports frequency division technology OFDMA And MU-MIMO 8x8. In addition, the access point is equipped with three radio modules and supports up to five thousand connected clients..

Peculiarities

  • Simultaneous operation on all frequencies
  • Multi-gigabit network interface
  • New power-saving mode extends battery life
  • Technology support Trust Anchor, guaranteeing the authenticity of software and hardware
  • Certification WIFI 6
  • Three radio modules: 2,4 GHz, 5 GHz And Bluetooth Low Energy (BLE) 5.0
  • Support OFDMA And MU-MIMO 8x8

Catalyst 9120 – the most progressive model among all access points based on a new data transfer protocol WI-FI 6. The model is equipped with 4 radio modules and is produced with both internal and external antennas..

Peculiarities

  • Certification WIFI 6
  • Four radio modules: 2,4 GHz, 5 GHz, 5 GHz (dedicated radio module) And Bluetooth Low Energy (BLE) 5.0
  • Support OFDMA And MU-MIMO 8x8
  • Simultaneous operation on all frequencies
  • Multi-gigabit network interface
  • New power-saving mode extends battery life
  • Technology support Trust Anchor, guaranteeing the authenticity of software and hardware
Access Point Specifications Cisco CW9164I-E:

Datasheet wifi 6 CW9164I-E

Specifications

802.11ax

4x4 uplink/downlink MU-MIMO with four spatial streams (5 GHz and 6 GHz)

2x2 uplink/downlink MU-MIMO with two spatial streams (2.4 GHz)

Uplink/downlink OFDMA, TWT, BSS coloring,  MRC

802.11ax beamforming

20-, 40-, 80-, and 160-MHz channels (6 GHz)

20-, 40-, 80-, channels (5 GHz)

20-MHz channels (2.4 GHz)

PHY data rates up to 7.49 Gbps (4x4 160 MHz on 6 GHz, 4x4 80 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS, CSD support,  WPA3 support

Integrated antenna

2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth

5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

6 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth

Interfaces

- 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45)

- 1x Management console port (RJ-45)

- 1x USB 2.0

Indicators

Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Input power requirements

802.3bt, Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+)

Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6

802.3af PoE (only for configuration staging, all radios off)

DC power input (54V)

System memory

2 GB DRAM

1 GB flash

Supported wireless LAN controllers

Cisco Catalyst 9800 Series Wireless Controllers (WLC)

Environmental

Nonoperating (storage) temperature

-22° to 158°F (-30° to 70°C)

Nonoperating (storage) altitude test

25°C (77°F) at 15,000 ft (4600 m)

Operating temperature

32° to 122°F (0° to 50°C)

Operating humidity

10% to 90% (noncondensing)

Operating altitude test

40°C (104°F) at 9843 ft (3000 m)

Dimensions

Dimensions (W x L x H)

9.5 x 9.5 x 2.2 in (24.13 x 24.13 x 5.69 cm)

Weight

3.54 lb (1.60 kg)

condition new
Your Rating