Access point Fortinet FAP-321C
695 $
Specifications Access points Fortinet FAP-321C:
FORTIAP 321C |
|
Hardware Type |
Indoor AP |
Number of Radios |
2 |
Number of Antennas |
6 Internal |
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz)* |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (3x3:3 stream) 20/40 MHz (64 QAM) |
Radio 2 Capabilities |
5 GHz a/n/ac (3x3:3 stream) 20/40/80 MHz (256 QAM) |
Maximum Data Rate |
Radio 1: up to 450 Mbps, Radio 2: up to 1,300 Mbps |
Interfaces |
1x 10/100/1000 Base-T RJ45 |
Power over Ethernet (PoE) |
IEEE 802.3af |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
2.4 GHz: 24 dBm / 251 mW (3 chains combined), 5 GHz: 25 dBm / 316 mW (3 chains combined) |
Kensington Lock |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af |
SSID Types Supported |
Local-Bridge, Tunnel, Mesh |
Per Radio Client Capacity |
Up to 128 |
Cellular Co-existence |
No |
LED Off Mode |
Yes |
802.11ac MU-MIMO Wave 2 |
No |
Transmit Beam Forming (TxBF) |
No |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU Packet Aggregation |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Rogue Scan Radio Modes |
Background, Full-time |
WIPS / WIDS Radio Modes |
Background, Full-time |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height |
6.3 x 6.3 x 1.66 inches, (160 x 160 x 42 mm) |
Weight |
0.77 lbs (0.35 kg) |
Package (shipping) Weight |
1.33 lbs (0.6 kg) |
Mounting Options |
Ceiling, T-Rail, and Wall |
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
Power Supply |
SP-FG20C-PA-XX, GPI-115, or GPI-130 |
Power Consumption (Maximum) |
12.6 W |
Humidity |
5–90% non-condensing |
Operating / Storage Temperature |
32–113°F (0–45°C) / -4–140°F (-20–60°C) |
Directives |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
No |
Mean Time Between Failures |
>30 Years |
IP Rating |
— |
Surge Protection Built In |
— |
Hit-less PoE Failover |
No |
condition | new |
---|
Log In