|
FORTIAP 421E
|
Hardware Type
|
Indoor AP
|
Number of Radios
|
2
|
Number of Antennas
|
8 Internal
|
Antenna Type and Peak Gain
|
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz
|
Frequency Bands (GHz)
|
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
Radio 1 Capabilities
|
2.4 GHz b/g/n (4x4:4 stream) 20/40 MHz (256 QAM)
|
Radio 2 Capabilities
|
5 GHz a/n/ac (4x4:4 stream) 20/40/80 MHz (256 QAM)
|
Maximum Data Rate
|
Radio 1: up to 800 Mbps Radio 2: up to 1,733 Mbps
|
Interfaces
|
2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port
|
Power over Ethernet (PoE)
|
Dual redundant PoE power ports with support for IEEE 802.3at (2x2 operation with 802.3af)
|
Simultaneous SSIDs
|
Up to 16 (14 if background scanning enabled)
|
EAP Type(s)
|
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
User/Device Authentication
|
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist
|
Maximum Tx Power
|
2.4 GHz: 24 dBm / 251 mW (4 chains combined), 5 GHz: 25 dBm / 316 mW (4 chains combined)
|
Kensington Lock
|
Yes
|
IEEE Standards
|
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
|
SSID Types Supported
|
Local-Bridge, Tunnel, Mesh
|
Per Radio Client Capacity
|
Up to 512
|
Cellular Co-existence
|
No
|
LED Off Mode
|
Yes
|
802.11ac MU-MIMO Wave 2
|
Yes
|
Transmit Beam Forming (TxBF)
|
Yes
|
Low-Density Parity Check (LDPC) Encoding
|
Yes
|
Maximum Likelihood Demodulation (MLD)
|
Yes
|
Maximum Ratio Combining (MRC)
|
Yes
|
A-MPDU and A-MSDU
|
Yes
|
MIMO Power Save
|
Yes
|
Short Guard Interval
|
Yes
|
Rogue Scan Radio Modes
|
Background, Full-time
|
WIPS / WIDS Radio Modes
|
Background, Full-time
|
Packet Sniffer Mode
|
Yes
|
Spectrum Analyzer
|
Yes
|
Length x Width x Height
|
8.5 x 8.5 x 2.2 inches, (215 x 215 x 56 mm)
|
Weight
|
3.53 lbs (1.6 kg)
|
Package (shipping) Weight
|
4.95 lbs (2.2 kg)
|
Power Supply
|
SP-FAP400-PA-XX, GPI-115, or GPI-130
|
Power Consumption (Max.)
|
23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2x2 mode)
|
Humidity
|
5–90% non-condensing
|
Log In