| |
FORTIAP S223E
|
|
Hardware Type
|
Indoor AP
|
|
Number of Radios
|
2 + 1 BT/BLE
|
|
Number of Antennas
|
4 External + 1 BT/BLE internal
|
|
Antenna Type and peak Gain
|
Dipole: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz
|
|
Frequency Bands (GHz)
|
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
|
Radio 1 Capabilities
|
2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (64 QAM)
|
|
Radio 2 Capabilities
|
5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM)
|
|
Maximum Data Rate
|
Radio 1: up to 300 Mbps Radio 2: up to 867 Mbps
|
|
Bluetooth Low Energy (BT/BLE) Radio
|
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power
|
|
Interfaces
|
2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port
|
|
Power over Ethernet (PoE)
|
Dual redundant PoE power ports with support for IEEE 802.3af & 802.3at
|
|
Simultaneous SSIDs
|
Up to 16 (14 if background scanning enabled)
|
|
EAP Type(s)
|
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
|
User/Device Authentication
|
WPA™ and WPA2™ with 802.1x or Preshared key, WEP,
Web Captive Portal, MAC blacklist & whitelist
|
|
Maximum Tx Power
|
2.4 GHz: 23 dBm / 200 mW (2 chains combined), 5 GHz: 22 dBm / 158 mW (2 chains combined)*
|
|
Kensington Lock
|
Yes
|
|
IEEE Standards
|
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az
|
|
SSID Types Supported
|
Local-Bridge, Mesh, & Tunnel (when managed by FortiGate)
|
|
Per Radio Client Capacity
|
Up to 512
|
|
Cellular Co-existence**
|
Yes
|
|
LED Off Mode
|
Yes
|
|
802.11ac MU-MIMO Wave 2
|
Yes
|
|
Transmit Beam Forming (TxBF)
|
Yes
|
|
Low-Density Parity Check (LDPC) Encoding
|
Yes
|
|
Maximum Likelihood Demodulation (MLD)
|
Yes
|
|
Maximum Ratio Combining (MRC)
|
Yes
|
|
A-MPDU and A-MSDU
|
Yes
|
|
MIMO Power Save
|
Yes
|
|
Short Guard Interval
|
Yes
|
|
Rogue Scan Radio Modes
|
Background, Full-time
|
|
WIPS / WIDS Radio Modes
|
Background, Full-time (recommended)
|
|
Packet Sniffer Mode
|
Yes
|
|
Spectrum Analyzer
|
Yes
|
|
Length x Width x Height
|
7.87 x 7.87 x 1.81 inches (200 x 200 x 46 mm)
|
|
Weight
|
1.3 lbs (0.6 kg)
|
|
Package (shipping) Weight
|
2.6 lbs (1.18 kg)
|
|
Mounting Options
|
Ceiling, T-Rail, and Wall
|
|
Included Accessories
|
Mount kits for Ceiling, T-Rail, and Wall, 4 dipole antennas
|
|
Power Supply
|
SP-FAP200-PA-XX, GPI-115, or GPI-130
|
|
Power Consumption (Maximum)
|
24 W
|
|
Humidity
|
5–90% non-condensing
|
|
Operating / Storage Temperature
|
-4–122°F (-20–50°C) / -40–158°F (-40–70°C)
|
|
Directives
|
Low Voltage Directive • RoHS
|
|
UL2043 Plenum Material
|
No
|
Log In