Access point Fortinet FAP-U24JEV
460 $
Specifications Access points Fortinet FAP-U24JEV:
FORTIAP U24JEV |
|
Hardware Type |
Wall Plate AP |
Number of Radios |
1 (can operate as 2) + 1 BT/BLE |
Number of Antennas |
2 Internal + 1 BT/BLE Internal |
Antenna Type and Peak Gain |
Patch: 3 dBi for 2.4 GHz, 4 dBi for 5 GHz |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (64 QAM) or |
Radio 2 Capabilities |
— |
Maximum Data Rate |
up to 867 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces |
4x 10/100/1000 Base-T RJ45 Ports (1x 802.3at PoE (PD), |
|
802.3af (max PSE output of 4W) or |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power (Conducted) |
2.4 GHz: 23 dBm / 200 mW (2 chains combined)* or 5 GHz: 21 dBm / 126 mW (2 chains combined)* |
Kensington Lock |
No |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az, 802.3ad |
SSID Types Supported |
Local-Bridge, Tunnel |
Per Radio Client Capacity |
Up to 128 |
Cellular Co-existence** |
Yes |
LED Off Mode |
Yes |
802.11ac MU-MIMO Wave 2 |
No |
Transmit Beam Forming (TxBF) |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Rogue Scan Radio Modes |
Background, Dedicated |
WIPS / WIDS Radio Modes |
Background, Dedicated (recommended) |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height |
6.1 x 3.7 x 1.2 inches (155 x 95 x 31 mm) |
Weight |
0.569 lbs (0.258 kg) |
Package (shipping) Weight |
1.34 lbs (0.606 kg) |
Mounting Options |
Wall plate or desk stand |
Included Accessories |
Mounting kit for wall plate |
Power Supply |
SP-FAPU24-PA-XX, GPI-115, or GPI-130 |
Power Consumption (Maximum) |
24W (Depends on PoE connected and USB power consumed) |
Humidity |
10–90% non-condensing |
Operating / Storage Temperature |
32–104°F (0–40°C) / -22–158°F (-30–70°C) |
Directives |
RoHS |
UL2043 Plenum Material |
No |
condition | new |
---|
Log In