Access point Fortinet FAP-U422EV
2000 $
Specifications Access points Fortinet FAP-U422EV:
FORTIAP U422EV |
|
Hardware Type |
Outdoor AP |
Number of Radios |
2 + 1 BT/BLE |
Number of Antennas |
8 External + 1 BT/BLE Internal |
Antenna Type and Peak Gain |
Dipole: 5 dBi for 2.4 GHz, 7 dBi for 5 GHz |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (4x4:4 stream) 20/40 MHz (64 QAM) |
Radio 2 Capabilities |
5 GHz a/n/ac (4x4:4 stream) 20/40/80/160 MHz (256 QAM) |
Maximum Data Rate |
Radio 1: up to 600 Mbps, Radio 2: up to 3,466 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces |
2x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
Proprietary or 802.3at |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, |
Maximum Tx Power (Conducted) |
2.4 GHz: 24 dBm / 251 mW (4 chains combined)* |
Kensington Lock |
No |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az, 802.3ad |
SSID Types Supported |
Local-Bridge, Tunnel & Mesh |
Per Radio Client Capacity |
Up to 256 |
Cellular Co-existence** |
Yes |
LED Off Mode |
Yes |
802.11ac MU-MIMO Wave 2 |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Rogue Scan Radio Modes |
Background, Dedicated |
WIPS / WIDS Radio Modes |
Background, Dedicated (recommended) |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height |
8.3 x 8.3 x 2.0 inches, (210 x 210 x 51 mm) |
Weight |
4.08 lbs (1.85 kg) |
Package (shipping) Weight |
11.42 lbs (5.18 kg) |
Mounting Options |
Wall Mount or Pole Mount |
Included Accessories |
Mounting Kits, Grounding Cable, |
Power Supply |
Proprietary PoE injector or GPI-130 |
Power Consumption (Maximum) |
22 W |
Humidity |
5–90% non-condensing |
Operating / Storage Temperature |
-40–140°F (-40–60°C) / -40–158°F (-40–70°C) |
Directives |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
No |
condition | new |
---|
Log In