Interface boardsВ orВ line cardsВ Juniper NetworksВ (line card, interface module) В allow you to expand your router or switch (modular platform, chassis) Required functional, including the necessary access ports at speedsВ 1GbE,В 10GbE,В 40GbEВ orВ 100GbE, control boards (switch control board) etc..
Interface boards JuniperВ represented by various modules that are compatible with a particular series (for example. interface module MS-MIC-16G compatible with the entire rangeВ Juniper MX, and the module MPC-3D-16XGE-SFPP series compatibleВ MX240,В MX480В andВ MX960).
interface board MICВ (Modular Interface Cards) is a small-sized module that provides physical connection to various types of network devices. MIC the board can support various physical interfaces in one module.В module Juniper MICsВ also support hot swapping and plugging. For example, in routers MX series, interface moduleВ MICВ installed in the moduleВ MPCВ (Modular Port Concentrator), and in series fromВ MX5В beforeВ MX104В moduleВ MPCВ already built in chassis.
interface module Juniper MPCВ (Modular Port Concentrator) provides transfer services Lkand packages. moduleВ MPCВ encapsulates packets and passes them through the module's outgoing interfacesВ MIC. everyoneВ MPC moduleВ equipped with up to four chipsetsВ Junos Trio, which performs the functions of management. For example, a router Juniper MX960 supports installation of up to 12 modules MPCs, and the platform MX480 before 3 MPCs. For proper operationВ module Juniper MPCВ You need to use high-performance cooling modules. Online JuniperВ http://www.juniper.netВ there is a calculator for calculating the recommended power and cooling power, for a specific series and used MPC modules. В В
Interface modules DPCВ (Dense Port Concentrators) Provides several physical interfaces and pass systems Lkand packages on a single board that fits into a slot in a router or modular chassis.В module DPCВ accepts incoming packets and sends outgoing packets to the network.
module Juniper PICВ (Physical Interface Card) installed inВ FPCВ (Flexible PIC Concentrators), similar to how they workВ MICВ andВ MPC modules.В PICsВ modules provide physical interfaces, andВ FPCsВ boards provide transfers Lkfor packets on the network. everyoneВ FPCВ the module is equipped with a microchipВ ASIC, which performs the functions of management, andВ FPCВ supports installation of 2 modulesВ PIC.
Technical characteristics of the interface module Juniper MPC6E-100-CFP2-IRB:
|
Software release
|
- Junos OS Release 13.3R2 and later
For information about which MICs are supported on this MPC,В MIC/MPC Compatibility.
|
|
Description
|
- Two slots for MICs
- Weight: 27.4 lb (12.43 kg) (net weight without blank panels)
- Model number: MX2K-MPC6E
- Name in the CLI:В MPC6E 3D
|
|
Hardware features
|
- Two slots for MICs
- Line-rate throughput of up to 480 Gbps
- Field-removable septum, to accommodate future full-height MICs
- Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes.
|
|
Maximum Power Requirements
|
Power requirement: 20.9 A @ 52 V (880 W; plus 104 W for each MIC)
MX2K-MPC6E:
- Typical: 648 W
- 880 W at 55В° C
- 834 W at 40В° C
- 824 W at 25В° C
|
|
Software features
|
- Optical diagnostics and related alarms
- Configurable LAN-PHY and WAN-PHY mode options per 10-Gigabit Ethernet port
- Two Packet Forwarding Engines for each MIC slot
- Intelligent oversubscription services
- SeeВ Protocols and Applications Supported by the MPC6E for MX2000 RoutersВ for information about the protocols and applications that this MPC supports.
|
|
LEDs
|
OK/FAILВ LED, one bicolor:
- Steady green—MPC is functioning normally.
- Blinking green—MPC is transitioning online or offline.
- Red—MPC has failed.
LINKВ LED, one bicolor per port:
- Green—Link is up.
- Yellow—Link is disabled.
- Off—Link is down.
|
В
В
Log In