Interface or line modules Aruba HPE enable specialists to control the status and loading of all infrastructure components without exception (access points, controllers, switches) and choose the configuration of existing as well as put into operation new hardware devices.
The AirWave option allows you to receive information about network-integrated users, collect statistics about their actions and traffic.
Features of interface modules Aruba HPE:
- turning an array of switches into one large virtual device, where each node of the stack has a common IP address (stacking);
- backup cooling, which is installed in hot-swappable mode and is activated in case of failure of the main (used) fans;
- connecting more network devices through interfaces not available on the switch by default (For example, SFP+ or CX4).
Interface or line modules Aruba HPE (line card, interface module) make it possible to expand the router or modular platform with the required functionality, including the necessary access ports at different speeds. Control or Processor modules (Routing Engine, Supervisor) Aruba HPE used in routers or modular switches to control the entire system and increase its performance.
Specifications of the interface module Aruba R0X42A:
Designed For
|
HPE Aruba 6405 48SFP+ 8SFP56, 6405 96G CL4 PoE 4SFP56, 6405 Switch Bundle, 6410 Switch Bundle
|
Networking
Ports
|
10Gb Ethernet x 24 + 1Gb Ethernet/10Gb Ethernet/25Gb Ethernet/50Gb Ethernet SFP56 x 4
|
Connectivity Technology
|
Wired
|
Cabling Type
|
Ethernet 10GBase-T
|
Data Link Protocol
|
Gigabit Ethernet, 10 Gigabit Ethernet, 25 Gigabit Ethernet, 50 Gigabit Ethernet
|
Data Transfer Rate
|
50 Gbps
|
Dimensions & Weight
Width
|
17.3 in
|
Depth
|
12.4 in
|
Height
|
1.7 in
|
Weight
|
6.61 lbs
|
Manufacturer Warranty
Service & Support
|
Limited warranty - lifetime
|
General
Device Type
|
Expansion module
|
Form Factor
|
Plug-in module
|
Expansion / Connectivity
Interfaces
|
24 x 10GBase-T - RJ-45 ¦ 4 x 1Gb Ethernet/10Gb Ethernet/25Gb Ethernet/50Gb Ethernet - SFP56
|
Log In