status and loading of all infrastructure components without exception (access points, controllers, switches) and choose the configuration of existing as well as put into operation new hardware devices.
The AirWave option allows you to receive information about network-integrated users, collect statistics about their actions and traffic.
Features of interface modules Aruba HPE:
- turning an array of switches into one large virtual device, where each node of the stack has a common IP address (stacking);
- backup cooling, which is installed in hot-swappable mode and is activated in case of failure of the main (used) fans;
- connecting more network devices through interfaces not available on the switch by default (For example, SFP+ or CX4).
Interface or line modules Aruba HPE (line card, interface module) make it possible to expand the router or modular platform with the required functionality, including the necessary access ports at different speeds. Control or Processor modules (Routing Engine, Supervisor) Aruba HPE used in routers or modular switches to control the entire system and increase its performance.
Specifications of the interface module Aruba R0X42C:
Width
|
12.4 in
|
Depth
|
17.3 in
|
Height
|
1.7 in
|
Weight
|
6.61 lbs
|
Manufacturer Warranty
Service & Support
|
Limited warranty - lifetime
|
General
Device Type
|
Switch - 24 ports - L3
|
Enclosure Type
|
Rack-mountable
|
Ports
|
24 x 10GBase-T + 4 x 50 Gigabit Ethernet SFP56
|
Expansion / Connectivity
Interfaces
|
24 x 10GBase-T ¦ 4 x 1Gbit/10Gbit/25Gbit/50Gbit SFP56
|
Log In