Managers or processor modules (Routing Engine, Supervisor) Cisco used in routers or modular switches to control the entire system and increase performance. Processor modules are produced for a specific series of routers or modular switches and chassis, or can also be combined with different platforms at the same time (for example. Catalyst 6500 Series and Cisco 7600 routers).
depending on the platform, control modules Cisco can support various services and services, such as quality of service (QoS), network management, security features, dynamic and static routing, switching at different levels modules OSI And much more. Majority control modules Cisco (Supervisor Engine) have built-in ports SFP+, QSFP+ and etc. Many platforms support the installation of a redundant processor module Cisco, to increase the fault tolerance of the entire routing system.
Specifications of the control module Cisco C9400-SUP-1XL/2:
|
Features
|
Performance and scalability
|
|
Centralized wired capacity
|
Up to 1.44 Tbps
|
|
Per-slot switching Capacity
|
80 Gbps
|
|
Total number of MAC addresses
|
Up to 64,000
|
|
Total number of IPv4 routes (ARP plus learned routes)
|
Up to 112,0001
|
|
FNF entries (v4/v6)
|
Up to 384,000/192,000
|
|
DRAM
|
16 GB
|
|
Flash
|
10 GB
|
|
VLAN IDs
|
4096
|
|
SSD capacity
|
960 GB
|
|
Total Switched Virtual Interfaces (SVIs)
|
4,000
|
|
Jumbo frame
|
9198 bytes
|
|
Forwarding rate
|
- 900 Mpps for IPv4
- 450 Mpps for IPv6
|
|
IPv4 routing entries
|
Up to 112,0001
|
|
IPv6 routing entries
|
Up to 56,0002
|
|
Multicast routes
|
Up to 16,000
|
|
QoS hardware entries
|
Up to 18,000
|
|
Security ACL hardware entries
|
Up to 18,000
|
|
Packet buffer
|
96 MB
|
Log In