Module Cisco C9600X-SUP-2
60645 $
Control or Processor modules (Routing Engine, Supervisor) Cisco used in routers or modular switches to control the entire system and increase performance. Processor modules are produced for a specific series of routers or modular switches and chassis, or can also be combined with different platforms at the same time.
Depending on the platform, control modules Cisco can support various services and services, such as quality of service (QoS), network management, security features, dynamic and static routing, switching at different levels modules OSI And much more. Majority control modules Cisco (Supervisor Engine) have built-in ports SFP+, QSFP+ and etc. Many platforms support the installation of a redundant processor module Cisco, to increase the fault tolerance of the entire routing system.
Specifications of the control module Cisco C9600X-SUP-2:
|
Datasheet C9600X-SUP-2 |
|
|
Specifications |
|
|
System Switching Capacity |
Up to 25.6 Tbps (Based on 9606R chassis with 4 Line Cards operating at 2.4 Tbps) |
|
Per-slot Switching Capacity |
Up to 6.4 Tbps |
|
ASICs |
1x Q200 |
|
Forwarding Rate |
8 Bpps |
|
DRAM |
32 GB |
|
Flash |
16 GB |
|
SSD capacity |
Up to 960 GB |
|
VLAN IDs |
4,096 |
|
PVST Instances |
4,096 |
|
STP Virtual Ports (Port* VLANs) for PVST |
32,000 |
|
STP Virtual Ports (Port* VALNs) for MST |
100,000 |
|
Switched Virtual Interfaces (SVIs) |
4096 |
|
Jumbo Frames |
9,216 |
|
Total number of MAC Addresses |
Up to 256,000 (Varies based on selected flexible SDM ASIC template) |
|
Total number of IPv4 Routes |
Up to 2,000,000 |
|
Total number of Ipv6 Routes |
Up to 1,000,000 |
|
Address Resolution Protocol (ARP) entries |
Up to 128,000 |
|
Neighbor Discovery Protocol (NDP) entries |
Up to 128,000 |
|
IGMP/MLD Snooping entries |
Up to 16,000 |
|
Multicast Routes |
Up to 32,000 |
|
QoS ACL Scale |
Up to 8,000 (Ipv4) Up to 4,000 (Ipv6) |
|
Security ACL Scale |
Up to 8,000 (Ipv4) Up to 4,000 (Ipv6) |
|
GRE Tunnels |
Up to 1,024 |
|
MACsec sessions |
Up to 1,024 per PHY |
|
NetFlow entries (Ipv4/Ipv6) |
Up to 2,000,000 (sampled) |
|
Packet Buffer |
80 MB (Shared Memory System) + 8 GB (High Bandwidth Memory) |
|
Minimum software requirement |
Cisco IOS XE Software version 17.7.1 |
|
Dimensions (H x W x D) |
1.7 x 15.0 x 13.41 in. (4.32 x 38.1 x 34.06 cm) to faceplate 1.7 x 15.0 x 15.7 in. (4.32 x 38.1 x 39.88 cm) to ejector |
|
Weight |
5.45 Kg (12.02 lb) |
|
Rack Units (RU) |
1 RU |
|
Operating Temperature |
-5° to 45° C (23° to 113° F) up to 6000 feet -5° to 40° C (23° to 104° F) up to 10,000 feet |
|
Storage Temperature |
-40° to 70° C (40° to 158° F) |
|
Relative Humidity, Operating and Non-operating, Non-condensing |
10% to 95%, noncondensing |
|
Altitude |
-60 to 3000 m (-197 to 9843 feet) |
|
Mean Time Between Failures (MTBF) (hours) |
C9600X-SUP-2: 305,880 |
|
Line-card support |
C9600-LC-40YL4CD, C9600-LC-24C, C9600-LC-48YL, C9600-LC-48TX |
| condition | new |
|---|
Log In