Interface or line modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the necessary access ports at speeds 1GbE, 10GbE, 40GbE or 100GbE. Mainly for each series of modular routers or chassis Cisco releases various expansion modules for a certain line of devices, but in most cases, the module can be used in more than one line (for example. interface module Cisco EHWIC-4ESG compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
depending on the platform, interface module Cisco can support a small number of ports, as is the case with small routers Cisco 1900 series and 48 ports in one module for 7600 series chassis. Interface modules and boards Cisco support many different interfaces and can be used both on the network Ethernet, as well as in other data networks.
Technical characteristics of the interface module Cisco EHWIC-VA-DSL-A:
ultimode DSL (VDSL2 and ADSL2/2+)
|
- Broadcom chipset - One RJ-11 VDSL2 interface - Dying gasp - IEEE 802.1q VLAN tagging - Independent DSL firmware loading
|
VDSL2: - ITU G.993.2 (VDSL2) - 997 and 998 band plans - VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a - U0 band support (25 to 276 kHz) - Ethernet packet transfer mode (PTM) based only on IEEE 802.3ah 64/65 octet encapsulation - Support for double-ended line testing (DELT) diagnostics mode - DSL Forum TR-067 compliance - Support for downstream speeds up to 100 Mbps in Ethernet PTM and up to 50 Mbps upstream
|
ADSL2/2+: - ADSL over POTS with Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+) - ADSL over POTS with Annex M (extended upstream bandwidth) G.992.3 (ADSL2) and G.992.5 (ADSL2+) - Cisco Multimode VDSL2 and ADSL2/2+ EHWIC (EHWIC-VA-DSL-M) is optimized for power spectrum density (PSD) mask EU-64 M9 - Cisco Multimode VDSL2 and ADSL2/2+ EHWIC (EHWIC-VA-DSL-M) supports UK Annex M - G.994.1 ITU G.hs - Reach-extended ADSL2 (G.922.3) Annex L for increased performance on loop lengths greater than 16,000 feet from central office - T1.413 ANSI ADSL DMT issue 2 compliance - DSL Forum TR-067, and TR-100 conformity - Impulse noise protection (INP) and extended INP - Downstream power backoff (DPBO) - Asynchronous transfer mode (ATM) only
|
Log In