Module Cisco HWIC-2FE
1665 $
Interface or line modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the necessary access ports at speeds 1GbE, 10GbE, 40GbE or 100GbE. Mainly for each series of modular routers or chassis Cisco releases various expansion modules for a certain line of devices, but in most cases, the module can be used in more than one line (for example. interface module Cisco EHWIC-4ESG compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
depending on the platform, interface module Cisco can support a small number of ports, as is the case with small routers Cisco 1900 series and 48 ports in one module for 7600 series chassis. Interface modules and boards Cisco support many different interfaces and can be used both on the network Ethernet, as well as in other data networks.
Technical characteristics of the interface module Cisco HWIC-2FE:
|
Manufacturer |
Cisco |
|
Part Number |
HWIC-2FE |
|
Device Type |
Expansion module |
|
Form factor |
Plug-in module |
|
The Fast Ethernet routed ports on the HWICs have the same characteristics and features as the onboard LAN interfaces for the integrated-services-router platforms. Along with Layer 3 connectivity, such as per-port access control lists (ACLs), routing, and IP addressing, these HWICs provide functions equivalent to those of onboard Fast Ethernet routed ports. |
|
|
Interfaces/Ports |
2 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/Auto MDI/MDI-X |
|
Data Transfer Rate |
10 Mbps Ethernet 100 Mbps Fast Ethernet |
|
Ethernet and VLAN |
IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP) IEEE802.3 with IEEE802.2 and Subnetwork Access Protocol (SNAP) IEEE 802.1Q VLAN tagging Autosensing, autonegotiation, and automatic media-dependent interface crossover (Auto-MDIX) Unique MAC address (not shared with any other interface on the router), assigned MAC address to interface, and subinterfaces Network Management Features CiscoWorks Simple Network Management Protocol (SNMP) support Cisco NetFlow accounting |
|
Additional Features |
IGMP, HSRP, GLBP, MPLS, GRE, IPv6, IPsec, L2TPv3, DHCP, NAT, GTS, MGCP, IBM, PPPoE, Bridging |
|
MIBs Supported |
ENTITY-MIB, IF-MIB, OLD-CISCO-CHASSIS-MIB, RMON-MIB, ETHERLIKE-MIB, CISCO-ENT-ASSET-MIB, CISCO-ENTITY-FRU-CONTROL-MIB |
|
Agency Approvals |
UL 1950, CSA-C22.2 #950, EN60950, TUV GS, IEC 950 |
|
Immunity |
EN300386, EN55024 and CISPR24, EN50082-1 |
|
Emissions |
FCC Part 15, Class A ICES-003, Class AEN55022, Class A CISPR22, Class AAS and NZS 3548, Class AVCCI, Class A EN 300386 EN61000-3-3 EN61000-3-2 |
|
Physical Specifications |
|
|
Dimensions (W x D x H) |
3.08 x 4.74 x 0.76 in. |
|
Weight |
2-Port: 0.16 lbs or 2.56 oz. |
|
Environmental Specifications |
Operating temperature: 32 to 104°F (0 to 40°C) Storage temperature: -4 to 149°F (-20 to 65°C) Relative humidity: 10 to 90%, noncondensing |
| condition | new |
|---|
Log In