Module Cisco IEM-3300-16P=
9646 $
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3300-16P=:
| Parameter | Specification |
|---|---|
| Model | Cisco IEM‑3300‑16P= |
| Module Type | Copper PoE/PoE+ Expansion Module |
| Base Platform Compatibility | Cisco Catalyst IE‑3300 / IE‑3400 Rugged Series switches |
| Slot Position | Side-mounted expansion slot on IE‑3300/3400 chassis |
| Ethernet Ports | 16 × 1 Gbps RJ‑45 copper with PoE/PoE+ (port-by-port categorization) |
| Port Speed & Auto‑MDIX | Auto‑negotiation at 10/100/1000 Mbps; supports Auto‑MDIX and full/half duplex |
| Power over Ethernet (PoE) | Full PoE+ support (IEEE 802.3at) |
| Maximum PoE Budget | Up to 90 W per port; total PoE budget up to 480 W |
| Switching Throughput | Line-rate, non-blocking forwarding across all ports |
| MAC Address Table | Shared with host switch; supports up to ~24,000 entries |
| Power Source | Powered via host IE‑3300 / IE‑3400 chassis |
| Typical Power Consumption | Approx. 100 W under full PoE load |
| Hot-Swap Capability | No—requires host switch power-down for installation or removal |
| Operating Temperature Range | –40 °C to +75 °C |
| Storage Temperature Range | –40 °C to +85 °C |
| Operating Humidity | 5 % to 95 %, non-condensing |
| MTBF | Typically over 300,000 hours |
| Physical Dimensions | Approx. 170 × 152 × 100 mm (H × W × D) |
| Weight | Approx. 1.1 kg (2.4 lbs) |
| Mounting Method | Integrates into IE‑3300/IE‑3400 chassis via DIN‑rail or wall-mount bracket |
| Certifications & Compliance | Matches industrial environmental and safety certifications of host switch |
| Typical Use Case | Adds 16 PoE+ Gigabit Ethernet ports for industrial devices (e.g. cameras, sensors) |
| condition | new |
|---|
Log In