Module Cisco IEM-3300-4MU=
4080 $
Catalyst IE3300 Expansion Module with 4 25G Copper 4PPoE
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3300-4MU=:
| Parameter | Description |
|---|---|
| Model | Cisco IEM‑3300‑4MU= |
| Module Type | Modular uplink interface module |
| Port Configuration | 4 x Multigigabit Ethernet (MU) ports |
| Port Speed Support | Supports 100 Mbps, 1 Gbps, 2.5 Gbps, and 5 Gbps speeds |
| Compatibility | Designed for use with Cisco Catalyst IE‑3300 rugged series base switches |
| Connection Interface | Side connector to base switch |
| Auto-MDIX Support | Yes (automatic crossover detection) |
| Auto-Negotiation | Yes (automatic speed and duplex detection) |
| Switching Capacity | Line-rate performance on all Multigigabit ports |
| PoE Support | Not supported on MU ports |
| Power Source | Powered through base switch |
| Typical Power Consumption | Approx. 12–15 W |
| Hot-Swap Support | No (must power off before attaching or removing) |
| Operating Temperature | –40 °C to +75 °C |
| Storage Temperature | –40 °C to +85 °C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF (Mean Time Between Failures) | Over 400,000 hours |
| Dimensions (H × W × D) | Approx. 152 × 66 × 135 mm |
| Weight | Approx. 1.0 kg |
| Mounting | DIN rail or panel mount (with base unit) |
| Industrial Compliance | Designed for harsh environments: vibration, shock, and moisture resistant |
| condition | new |
|---|
Log In