Module Cisco IEM-3400-8P=
7363 $
Catalyst IE3400 with 8 GE Copper PoEPoE Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3400-8P=:
| Parameter | Description |
|---|---|
| Model | Cisco IEM‑3400‑8P= |
| Module Type | Expansion module with 8 Gigabit Ethernet ports with PoE/PoE+ support |
| Compatibility | Designed for use with Cisco Catalyst IE‑3400 base switches |
| Connection Interface | Side connector for attachment to base switch |
| Port Count | 8 x 10/100/1000 Mbps RJ‑45 (with PoE/PoE+ capability) |
| Auto-MDIX Support | Yes (automatic crossover detection) |
| Auto-Negotiation | Yes (auto speed and duplex detection) |
| PoE Support | IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) |
| PoE Budget | Up to 240 W (combined with base switch – up to 480 W) |
| Power Source | Powered via the base switch |
| Typical Power Consumption | Approximately 20 W (excluding PoE load) |
| Switching Capacity | Line-rate, non-blocking switching on all ports |
| MAC Address Table | Uses base switch resources (up to 24,000 entries) |
| Hot-Swap Support | No (must power off before installing) |
| Operating Temperature | –40 °C to +75 °C |
| Storage Temperature | –40 °C to +85 °C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF (Mean Time Between Failures) | Over 300,000 hours |
| Dimensions (H × W × D) | Approx. 152 × 66 × 135 mm |
| Weight | Approx. 0.9 kg |
| Mounting | DIN rail or panel mount (with base unit) |
| Build | Industrial-grade: dust, moisture, and vibration resistant |
| condition | new |
|---|
Log In