Module Cisco IEM-3400-8S=
4919 $
Catalyst IE3400 with 8 GE SFP ports Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3400-8S=:
| Parameter | Specification |
|---|---|
| Model | Cisco IEM-3400-8S= |
| Module Type | Fiber SFP Expansion Module |
| Compatible Platforms | Cisco Catalyst IE‑3400 Rugged Series switches |
| Slot Interface | Side-mounted module slot on host chassis |
| Fiber Ports | 8 × 1 Gbps SFP fiber uplink ports |
| Supported Media Types | 100BASE-FX, 1000BASE-SX, 1000BASE-LX, 1000BASE-T (via SFP) |
| Duplex Support | Full duplex only |
| PoE Capable | No |
| Switching Performance | Wire-speed, non-blocking switching across all 8 ports |
| MAC Address Table Capacity | Inherited from base switch (up to ~24,000 entries) |
| Power Source | Powered by host IE-3400 chassis |
| Typical Power Consumption | Approx. 20 Watts |
| Hot-Swappable | No—requires host device power-down for installation |
| Operating Temperature Range | –40 °C to +75 °C |
| Storage Temperature Range | –40 °C to +85 °C |
| Operating Humidity | 5% to 95% (non-condensing) |
| MTBF (Mean Time Between Failures) | Over 300,000 hours |
| Dimensions (H × W × D) | Approx. 148 × 102 × 142 mm |
| Weight | Approx. 0.9 kg |
| Mounting Method | Installed into host chassis: DIN‑rail or wall-mountable |
| Compliance Ratings | Matches industrial certifications and rugged standards of host switch |
| Typical Use Case | Adds fiber uplink capacity to rugged industrial sites |
| condition | new |
|---|
Log In