Module Cisco IEM-3400-8T=
4115 $
Catalyst IE3400 with 8 GE Copper ports Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3400-8T=:
| Parameter | Specification |
|---|---|
| Model | Cisco IEM-3400-8T= |
| Module Type | 8-Port Gigabit Ethernet Copper Expansion Module |
| Compatible Base Platforms | Cisco Catalyst IE3400 Rugged Series switches |
| Slot Interface | Side-mounted module slot on host chassis |
| Ethernet Ports | 8 × 10/100/1000Base-T (RJ-45) copper ports |
| Port Speed & Auto-MDIX | Auto-negotiation at 10/100/1000 Mbps; supports Auto-MDIX and full/half duplex |
| Switching Performance | Line-rate, non-blocking forwarding across all module ports |
| MAC Address Table Capacity | Shared with host switch; supports up to approximately 8,000 entries |
| Power Source | Powered via host IE3400 chassis |
| Typical Power Consumption | Approximately 36 Watts |
| Hot-Swappable | No — requires host switch power-down for installation or removal |
| Operating Temperature Range | –40°C to +75°C |
| Storage Temperature Range | –40°C to +85°C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF (Mean Time Between Failures) | Typically over 300,000 hours |
| Physical Dimensions (H × W × D) | Approximately 148 × 102 × 142 mm (5.8 × 4.0 × 5.6 in) |
| Weight | Approx. 0.9 kg (2.0 lbs) |
| Mounting Method | Installed into host chassis: DIN-rail or wall-mount bracket |
| Environmental & Safety Ratings | Matches industrial environmental and safety certifications of host switch |
| Typical Use Case | Adds 8 Gigabit Ethernet copper ports to expand network connectivity in industrial environments |
| condition | new |
|---|
Log In