Module Cisco IEM-3500-16P=
IE3500 with 16 GE PoE/PoE+ Copper, Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3500-16P=:
| Parameter | Specification |
|---|---|
| Model | Cisco IEM‑3500‑16P= |
| Module Type | PoE Expansion Module |
| Compatible Base System | Cisco IE‑3500 Rugged Series industrial switches |
| Slot Location | Side-mounted PoE expansion slot on host IE‑3500 chassis |
| Copper Ports | 16 × 1 Gbps RJ‑45 copper Ethernet with PoE/PoE+ support |
| Port Speed / Auto‑MDIX | 10/100/1000 Mbps per port, Auto‑MDIX enabled |
| Duplex Support | Full and half duplex on all copper ports |
| PoE Power Budget | Up to 90 W per port; total PoE budget up to 480 W when installed on appropriate base |
| Switching Performance | Line‑rate, non‑blocking forwarding across all ports |
| MAC Address Table | Shared with host IE‑3500 switch (up to ~24,000 entries) |
| Power Source | Powered directly from host IE‑3500 switch |
| Typical Power Consumption | Approx. 21–90 W depending on PoE load |
| Hot‑Swappable? | No — requires host switch power‑down for installation |
| Operating Temperature Range | –40 °C to +75 °C |
| Storage Temperature Range | –40 °C to +85 °C |
| Operating Humidity | 5% to 95%, non‑condensing |
| MTBF (Mean Time Between Failures) | Typically > 300,000 hours |
| Physical Dimensions | Approx. 170 mm × 152 mm × 100 mm |
| Weight | Approx. 1.0 kg (2.2 lbs) without packaging |
| Mounting Options | Installed into IE‑3500 chassis (DIN‑rail or wall-mount) |
| Certifications | Inherits industrial and safety certifications from host IE‑3500 |
| condition | new |
|---|
Log In