Module Cisco IEM-3500-16T=
IE3500 with 16 GE Copper ports, Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3500-16T=:
| Parameter | Description |
|---|---|
| Model | Cisco IEM-3500-16T= |
| Type | 10/100/1000BASE-T Expansion Module (RJ-45) |
| Compatible with | Cisco IE-3500 Series modular switches |
| Expansion Slot Type | Side expansion for modular IE-3500 base switches |
| Number of Ports | 16 × RJ-45 Ethernet ports |
| Port Speed | 10/100/1000 Mbps |
| Duplex Mode | Full and half duplex (auto-negotiation) |
| Auto-MDIX Support | Yes |
| MAC Address Table | Shared with the base switch (up to 24,000 MAC addresses depending on model) |
| Switching Capacity | Line-rate, non-blocking forwarding |
| PoE Support | Not supported |
| MTBF (Mean Time Between Failures) | > 300,000 hours (varies with environmental conditions) |
| Hot Swappable | Not hot-swappable; requires shutdown for module installation |
| Power Source | Supplied by the host IE-3500 switch |
| Power Consumption | Approx. 6–9 Watts (depends on traffic and link conditions) |
| Operating Temperature | –40°C to +75°C |
| Storage Temperature | –40°C to +85°C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Mounting | Attaches directly to compatible IE-3500 base switch chassis |
| Dimensions (H × W × D) | Approx. 138 × 82 × 107 mm |
| Weight | Approx. 0.6 kg |
| Certifications | Same as the host switch (inherits compliance ratings) |
| Industrial Ratings | Designed for harsh industrial environments (rugged hardware design) |
| condition | new |
|---|
Log In