Module Cisco IEM-3500-4MU=
IE3500 with 4 2.5G Copper (4PPoE), Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3500-4MU=:
| Parameter | Specification |
|---|---|
| Model | Cisco IEM‑3500‑4MU= |
| Module Type | Multi‑Gigabit PoE Expansion Module |
| Compatible Base Platform | Cisco IE‑3500 and IE‑3400 Rugged Series industrial switches |
| Slot Location | Side-mounted expansion on compatible granular-capable base chassis |
| Copper Ports | 4 × 1 Gbps / 2.5 Gbps RJ‑45 ports supporting PoE/PoE+/4PPoE |
| Port Speed / Auto‑MDIX | Auto-negotiates 1 G / 2.5 G and supports Auto‑MDIX |
| Duplex Support | Full and half duplex support |
| PoE Power Capability | Up to 90 W per port (IEEE 802.3bt Type 4) when host provides adequate budget |
| Switching Performance | Non‑blocking, line‑rate forwarding across all ports |
| MAC Address Table | Shared with host—up to ~24,000 entries |
| Power Supply Source | Powered from host switch chassis |
| Typical Module Power Draw | Approx. 20 W when idle (varies with load) |
| Hot-Swappable? | No — requires power-down of base switch for module installation |
| Operating Temperature Range | –40 °C to +75 °C |
| Storage Temperature Range | –40 °C to +85 °C |
| Operating Humidity Range | 5% to 95% non-condensing |
| MTBF (Mean Time Between Failures) | Over 300,000 hours |
| Dimensions (H × W × D) | Approx. 152 mm × 91 mm × 135 mm |
| Weight | Approx. 1.4 kg |
| Mounting Options | DIN‑rail via host chassis mounting—no external mounting required |
| Certifications | Matches industrial and safety ratings of the host IE‑3500/IE‑3400 switch |
| Use Case | Adds multi‑gigabit PoE-enabled copper ports to modular switches in industrial environments |
| condition | new |
|---|
Log In