Module Cisco IEM-3500-6T2S=
IE3500 with 6 GE Copper + 2 GE SFP, Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3500-6T2S=:
| Parameter | Description |
|---|---|
| Model | Cisco IEM‑3500‑6T2S= |
| Type | Expansion Interface Module |
| Compatible with | Cisco IE‑3500 Rugged Series industrial switches |
| Slot Type | Side-mounted expansion slot on IE‑3500 base switch |
| Ports | 6 × 1 Gbps copper RJ‑45 Ethernet + 2 × 1 Gbps SFP fiber uplink ports |
| Port Speeds | 1 Gbps per port, auto-negotiation |
| Duplex Mode | Full and half duplex for copper; full duplex for SFP |
| Copper Port Auto‑MDIX | Supported |
| PoE Support | Not supported |
| Switching Capacity | Line-rate, non-blocking switching across all ports |
| MAC Address Table | Shared with host IE‑3500; up to 24,000 entries |
| Power Source | Powered by host switch; no separate power required |
| Typical Power Consumption | Approx. 15 W |
| Hot-Swappable | No — module must be installed when host switch is offline |
| Operating Temperature | –40 °C to +75 °C |
| Storage Temperature | –40 °C to +85 °C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF | |
| Dimensions (H × W × D) | Approx. 170 × 152 × 100 mm |
| Weight | Approx. 0.9 kg |
| Mounting | DIN-rail or wall-mount via IE‑3500 chassis |
| Certifications | Inherits the industrial and safety ratings of the host IE‑3500 switch |
| Usage Note | Supports enhanced redundancy features (MRP, REP, DLR) when used with compatible base switch (cisco.com, cisco.com, networktigers.com, cisco.com, linknewnet.com, cisco.com, router-switch.com, cisco.com) |
| condition | new |
|---|
Log In