Module Cisco IEM-3500-8P=
IE3500 with 8 GE PoE/PoE+ Copper ports, Expansion Module
Interface or linear modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the required speed ports at speed 1GbE, 10GbE, 40GbE or 100GbE. Mainly under each series of modular routers or chassis Cisco It produces various extensions under a certain line of devices, but in most cases the module can be used in not one line (eg. interface module Cisco EHWIC-4ESG Compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).
Depending on the platform, interface module Cisco can support a small number of ports as in the case of small routers Cisco 1900 series, as well as 48 ports in one module for chassis 7600 series. Interface modules and fees Cisco Supports a variety of different interfaces and can be used as in the network Ethernet, and in other data networks.
The technical characteristics of the interface module Cisco IEM-3500-8P=:
| Parameter | Description |
|---|---|
| Model | Cisco IEM‑3500‑8P= |
| Module Type | PoE Expansion Module |
| Compatible Base System | Cisco IE‑3500 Rugged Series switches |
| Slot Location | Side-mounted expansion slot on host IEC‑550 switch |
| Copper Ports | 8 × 1 Gbps RJ‑45 copper Ethernet with PoE/PoE+ support |
| Port Speed & Auto‑MDIX | 10/100/1000 Mbps, supports auto-MDIX |
| Duplex Mode | Full and Half duplex supported on copper ports |
| PoE Power Budget | Full PoE/PoE+ support across 8 ports |
| Switching Performance | Line-rate, non-blocking forwarding across all ports |
| MAC Address Table | Shared with base switch—up to 24,000 entries |
| Power Source | Powered directly from host IE‑3500 switch |
| Typical Power Usage | Approx. 90 W depending on PoE load |
| Module Power Consumption | Draws power from host chassis; exact draw varies by PoE load |
| Hot‑swappable? | No—requires base switch power-down for module installation |
| Operating Temp Range | –40 °C to +75 °C |
| Storage Temp Range | –40 °C to +85 °C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF | Typically > 300,000 hours |
| Physical Dimensions | Approx. height 170 mm × width 152 mm × depth 100 mm |
| Weight | Approx. 1.0 kg (2.2 lbs) without packaging |
| Mounting Options | Mounts via host chassis on DIN rail or wall |
| Certifications Coverage | Inherits industrial ratings and certifications of host device |
| condition | new |
|---|
Log In