Module Cisco IRM-1100-SPMI
450 $
Network modules CiscoВ (network modules) allow you to expand the switch or modular platform with the required functionality or ports.В Network modules CiscoВ can be used as high speedВ uplink-portsВ for connection to the trunk or to other devices.В Uplink-moduleВ are produced under a certain line, and can supportВ SFP+,В Base-TВ and other ports at different speeds,В 1GbE,В 10GbEВ and higher.В stacking moduleВ (stack modules) are produced under a certain line for stackable series of switches, and with the help of them you can connect switches into one logical device. Most network modules are hot swappable (hot-swappable). В
Specifications of switch Cisco IRM-1100-SPMI:В
|
Feature |
Specification |
|
Memory |
|
|
Default and maximum DRAM |
4 GB |
|
Default and maximum Flash memory |
8 GB (physical) / 4 GB (usable) |
|
Ingress protection rating |
IP30 |
|
Physical characteristics |
|
|
Physical dimensions (H x W x D) В Chassis В Expansion Module |
В В В 2.36 in. x 5.22 in. x 4.92 in. (60 x 132.5 x 124.9 mm) В 1.3 in. x 5.2 in. x 4.9 in. (33 x 132 x 124 mm) |
|
Weight В Chassis В Expansion Module IRM-1100-SPMI: IRM-1100-SP: |
В 2.25 lbs (1.02 kg) В В В В 1.65 lbs (0.75 kg) 1.45 lbs (0.66 kg) |
|
Mounting options |
Panel, wall, and din rail (vertical and horizontal) mount |
|
Power specifications |
Nominal voltage: 12V to 48V DC Minimum and maximum input voltage: 9.6-60V DC Maximum and minimum input current: 1.24A (9.6V DC) and 0.26A (60V DC) |
|
Power consumption |
At idle: 6.6W Typical: 9.8W Maximum: 12W Additional 10W (typical) with expansion module and 2ndВ cellular |
|
Interfaces on the base platform |
|
|
Console |
Mini type-B USB |
|
WAN interfaces |
-В В Combo 10/100/1000 Gigabit Ethernet port (RJ45 and SFP) on the base platform -В В An additional 10/100/1000 Gigabit Ethernet SFP on the expansion module. Refer to Table 8 for supported SFPs -В В LTE: Modular with options for single and dual active LTE and LTE-Advanced |
|
LAN interfaces |
-В В Four 10/100BASE-T Fast Ethernet ports |
|
Input and output |
-В В ALARM input port |
|
LEDs |
-В В System OK -В В Link for Ethernet WAN ports -В В VPN -В В Tricolor user-configurable LED -В В ALARM |
|
Serial interface |
-В В Isolated RS-232 RJ45 DTE port -В В Support for asynchronous mode with speeds up to 115,200 baud |
|
Serial protocols |
SCADA, DNP3, T101-104, Raw Socket TCP, and UDP |
|
Environmental characteristics |
|
|
Environmental operating temperature range |
–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow –40 to 158°F (–40 to 70°C) in a vented cabinet with 40 Linear Feet per Minute (LFM) of air –40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air Type tested at 85°C for 16 hours |
|
Operating altitude |
40В°C up to 13,800 ft (operating) per IEC 68-2-41 |
|
Non-operating shock and vibration |
-В В 50-60G (3.76 m/s minimum) -В В 3-500Hz at 1.12 GRMS (BP at 10 and 100 Hz) |
|
Standard safety certifications |
-В В UL 60950-1, 2В ndВ edition -В В CAN/CSA C22.2 No. 60950-1, 2В ndВ edition -В В EN 60950-1, 2В ndВ edition -В В CB to IEC 60950-1, 2В ndВ edition with all group differences and national deviations |
|
Hazardous locations standards |
-В В ANSI/ISA 12.12.01 (Class 1, Div 2 A-D) -В В CSA 213 (Class 1, Div 2 A-D) -В В IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC) -В В EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC) |
|
Industry standards |
-В В IEC 61850-3 -В В IEEE 1613 |
|
EMC emissions CLASS A |
-В В 47 CFR Part 15 B -В В EN 55032:2015 -В В CISPR 32 Edition 2 -В В CNS13438: 2006 -В В EN 300 386 V1.6.1 -В В ICES-003 Issue 6: 2016 -В В KN 32: 2015 -В В TCVN 7189: 2009 -В В V-2/2015.04 -В В V-3/2015.04 -В В AS/NZ CISPR32 |
|
EMC immunity |
-В В EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29 -В В CISPR24: 2010 + A1: 2015 -В В EN 300 386 V1.6.1 -В В EN 55024: 2010 + A1: 2015В -В В EN 55035:2017 -В В KN35: 2015 -В В TCVN 7317:2003 -В В QCVN 18:2014 |
В
В
| condition | new |
|---|
Log In