Module Cisco NC55-24X100G-SB
360000 $
Interface or line modules CiscoВ (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the necessary access ports at speedsВ 1GbE,В 10GbE,В 40GbEВ orВ 100GbE. Mainly for each series of modular routers or chassisВ CiscoВ releases various expansion modules for a certain line of devices, but in most cases, the module can be used in more than one line (for example. interface module Cisco EHWIC-4ESG compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).В
depending on the platform,В interface module CiscoВ can support a small number of ports, as is the case with small routers Cisco 1900 series and 48 ports in one module for 7600 series chassis.В Interface modules and boards CiscoВ support many different interfaces and can be used both on the networkВ Ethernet, as well as in other data networks.
Technical characteristics of the interface module Cisco NC55-24X100G-SB:
|
Description of the product |
Cisco NCS 5500-24 ports 100GE and 12 ports 40GE |
|
Device Type |
Extension Module |
|
Format |
Plug-in Module |
|
Specification |
Layer 3 switching, RPL support, MPLS support, IPv6 support, virtual route redundancy Protocol (VRRP) support, quality of service (ECM) support, bidirectional detection (BFD)), support for LACP Protocol (LACP), support for the DiffServ code point (DSCP), open shortest path first (OSPF), iPXE, network synchronization protocol (NTP), Ethernet on MPLS (EoMPLS), VPN L3VPN) support, zero-touch provisioning (ZTP), System intermediate to intermediate (IS-IS) |
|
Ability |
-IPv4 routes: 2 million |
|
Data Link Protocol |
100 Gigabit Ethernet |
|
Data transfer Rate |
100gbit/S |
|
Ports |
-24 x 100Gb Ethernet-QSFP + |
|
MAC Address Table size |
750 000 entries |
|
Compliance standards |
IEEE 802.1 AE |
|
Compatibility |
Cisco NCS 5500 |
|
Power |
980 Watt |
|
Required Operating System |
Cisco IOS XR Software |
В
В
| condition | new |
|---|
Log In