Managers or processor modules (Routing Engine, Supervisor) Cisco used in routers or modular switches to control the entire system and increase performance. Processor modules are produced for a specific series of routers or modular switches and chassis, or can also be combined with different platforms at the same time (for example. Catalyst 6500 Series and Cisco 7600 routers).
depending on the platform, control modules Cisco can support various services and services, such as quality of service (QoS), network management, security features, dynamic and static routing, switching at different levels modules OSI And much more. Majority control modules Cisco (Supervisor Engine) have built-in ports SFP+, QSFP+ and etc. Many platforms support the installation of a redundant processor module Cisco, to increase the fault tolerance of the entire routing system.
Specifications of the control module Cisco WS-X45-SUP7L-E:
|
Product Code
|
WS-X45-SUP7L-E
|
|
Centralized switching capacity
|
520 Gbps
|
|
Per-slot switching capacity
|
48 Gbps
|
|
Throughput
|
225 Mpps for IPv4
110 Mpps for IPv6
225 Mpps for L2 Bridging
|
|
IPv4 routing entries
|
64,000
|
|
IPv6 routing entries
|
32,000
|
|
Multicast routes
|
32,000
|
|
CPU
|
Dual core; 1.5 GHz
|
|
CPU queues
|
64
|
|
Synchronous Dynamic RAM (SDRAM)
|
2 GB
|
|
Boot flash
|
1G
|
|
Security and QoS hardware entries
|
64,000
|
|
Dynamic Host Configuration Protocol (DHCP) snooping entries
|
12,000
|
|
Cisco Network Admission Control (NAC)
|
4,000
|
|
MAC addresses
|
55,000
|
|
Active VLANs
|
4,094
|
|
Address Resolution Protocol (ARP) entries
|
47,000
|
|
Spanning Tree Protocol instances
|
12,000
|
|
Switched virtual interfaces (SVIs)
|
4,094
|
|
SPAN
|
8 bidirectional sessions (ingress and egress)
|
Log In