Module Cisco WS-X6708-10G-3C

SKU

WS-X6708-10G-3C

Skip to the end of the images gallery

Skip to the beginning of the images gallery

€4,950.00

EAN: 12187

Stock: available on order

Lead time: 25-35 days

GPL price:

48875 $

Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3C, requires X2

Category: Line Cards

Details

Interface or line modules Cisco (line card, interface module) allow you to expand the router or modular platform with the required functionality, including the necessary access ports at speeds 1GbE, 10GbE, 40GbE or 100GbE. Mainly for each series of modular routers or chassis Cisco releases various expansion modules for a certain line of devices, but in most cases, the module can be used in more than one line (for example. interface module Cisco EHWIC-4ESG compatible with routers Cisco ISR G2 1900 series, 2900 series and 3900 series).

depending on the platform, interface module Cisco can support a small number of ports, as is the case with small routers Cisco 1900 series and 48 ports in one module for 7600 series chassis. Interface modules and boards Cisco support many different interfaces and can be used both on the network Ethernet, as well as in other data networks.

Technical characteristics of the interface module Cisco WS-X6708-10G-3C:

Feature	8-Port 10GbE Fiber Module
Ports	8
Optics	X2
Switch fabric connection	40 Gbps (80 Gbps full duplex)
Oversubscription	2:1
Forwarding engine	- WS-X6708-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256,000 routes - WS-X6708-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1 million routes
Queues	- Receive: 8q4t - Transmit: 1p7q4t
Queuing mechanisms	- CoS-based queue mapping - Differentiated services code point (DSCP)–based queue mapping
Scheduler	- DWRR - WRED - Shaped Round Robin (SRR) at egress
Port buffers	200 MB per port
Hardware-based multicast replication (Layer 2)	- Ingress and egress - Approximately 20 GB per replication engine - 2 replication engines per module
Hardware-based multicast replication (Layer 3)	- Ingress and egress - Approximately 20 GB per replication engine - 2 replication engines per module
Jumbo frame support for bridged and routed packets	Up to 9216 bytes
Maximum port density per chassis	66 ports (9-slot chassis)
Maximum port density per VSS	132 ports
Can be used to form virtual switch link	Yes
Supervisor engines supported	Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)
Chassis supported	- Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray, or the Cisco 7604, 7609 with dual fan tray, or 7600-S Series chassis (NEBS compliant: operating temperature up to 55°C), or; - Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray or the Cisco 7606, 7613, and 7609 chassis with single fan tray (non-NEBS compliant: operating temperature up to 40°C) - Not supported in Cisco Catalyst 6503 non-E Series chassis
Slot requirements	- Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis; or Cisco 7604, 7606, 7609, or 7600-S Series chassis - Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 or Cisco 7613 chassis
Onboard memory	1 GB default

Reviews

Module Cisco WS-X6708-10G-3C

Real email address is required to social networks

Log In