|
Model
|
Information
|
GPL Price
|
|
MPC4E-3D-32XGE-IR-B
|
MPC4E, FULL SCALE L2/L3 AND 16 L3VPN, MX
|
305 000 $
|
|
MPC4E-3D-32XGE-R-B
|
MPC4E with Support for 10GE Interfaces. Includes Full Scale L2, L3, L3VPN Features. Optics Sold Separately
|
340 000 $
|
Interface boards or line cards Juniper Networks (line card, interface module) allow you to expand your router or switch (modular platform, chassis) Required functional, including the necessary access ports at speeds 1GbE, 10GbE, 40GbE or 100GbE, control boards (switch control board) etc..
Interface boards Juniper represented by various modules that are compatible with a particular series (for example. interface module MS-MIC-16G compatible with the entire range Juniper MX, and the module MPC-3D-16XGE-SFPP series compatible MX240, MX480 and MX960).
interface board MIC (Modular Interface Cards) is a small-sized module that provides physical connection to various types of network devices. MIC the board can support various physical interfaces in one module. module Juniper MICs also support hot swapping and plugging. For example, in routers MX series, interface module MIC installed in the module MPC (Modular Port Concentrator), and in series from MX5 before MX104 module MPC already built in chassis.
interface module Juniper MPC (Modular Port Concentrator) provides transfer services Lkand packages. module MPC encapsulates packets and passes them through the module's outgoing interfaces MIC. everyone MPC module equipped with up to four chipsets Junos Trio, which performs the functions of management. For example, a router Juniper MX960 supports installation of up to 12 modules MPCs, and the platform MX480 before 3 MPCs. For proper operation module Juniper MPC You need to use high-performance cooling modules. Online Juniper http://www.juniper.net there is a calculator for calculating the recommended power and cooling power, for a specific series and used MPC modules.
Interface modules DPC (Dense Port Concentrators) Provides several physical interfaces and pass systems Lkand packages on a single board that fits into a slot in a router or modular chassis. module DPC accepts incoming packets and sends outgoing packets to the network.
module Juniper PIC (Physical Interface Card) installed in FPC (Flexible PIC Concentrators), similar to how they work MIC and MPC modules. PICs modules provide physical interfaces, and FPCs boards provide transfers Lkfor packets on the network. everyone FPC the module is equipped with a microchip ASIC, which performs the functions of management, and FPC supports installation of 2 modules PIC.
Technical characteristics of the interface module Juniper MPC4E-3D-32XGE-SFPP:
|
Software release
|
- Junos OS Release 12.3R2 and later
|
|
Description
|
- Fixed configuration MPC with thirty-two 10-Gigabit Ethernet ports
- Power requirement: 12.7 A @ 48 V (610 W)
- Weight: 19.4 lb (8.8 kg)
- Model number: MPC4E-3D-32XGE-SFPP
|
|
Hardware features
|
- Line-rate throughput of up to 260 Gbps
- WAN-PHY mode at 10 Gbps on a per-port basis
- Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes.
- Supported on MX2020, MX2010, MX960, MX480, and MX240 routers with both normal-capacity and high-capacity power supplies and fan trays.
|
|
Software features
|
- Optical diagnostics and related alarms
- Up to 260 Gbps of full-duplex traffic
- Intelligent oversubscription services
- Configurable LAN-PHY and WAN-PHY mode options per port
- Local loopback
- Configurable to interoperate with routers that use the 100-Gigabit Ethernet PIC (Type 4 PIC on Type 4 FPC)
- See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC4Es for information about the protocols and applications that this MPC supports.
|
|
Cables and connectors
|
- Fiber-optic 10-gigabit small form-factor pluggable (SFP+) transceivers:
- Connector: Duplex LC
- 10GBASE-SR (model number: SFPP-10GE-SR)
- 10GBASE-LR (model number: SFPP-10GE-LR)
- 10GBASE-ER (model number: SFPP-10GE-ER-XT)
- 10GBASE-ZR (model number: SFPP-10GE-ZR)
Note: SFPP-10GE-ZR has a commercial temperature rating and is not NEBS compliant when plugged into the 32x10GE MPC4E with SFP+. If the ambient air temperature exceeds 40°C, Junos OS disables the transmitter, which takes the optical transceiver offline.
- 10GBASE-ZR (model number: SFPP-10G-OTN-XT)
- Supported in Junos OS Release 12.3R5, 13.2R3, 13.3, and later
- NEBS compliant
- Dual-rate extended temperature transceiver that supports LAN-PHY and WAN-PHY modes, and OTN rates
- 10GBASE-ZR (model number: SFPP-10G-DT-ZRC2)
- Supported in Junos OS Release 12.3R6, 13.2R3, 13.3R2, 14.1R1, and later
- Supports LAN-PHY and WAN-PHY modes
- Is tunable by configuring the wavelength statement at the [edit interfaces interface-name optics-options] hierarchy level (see wavelength)
Note: SFPP-10G-DT-ZRC2 is not NEBS compliant when plugged into the MPC4E-3D-32XGE-SFPP MPC. If the ambient air temperature exceeds 40°C, Junos OS disables the transmitter, which takes the optical transceiver offline.
|
|
LEDs
|
OK/FAIL LED, one bicolor:
- Steady green—MPC is functioning normally.
- Blinking green—MPC is transitioning online or offline.
- Red—MPC has failed.
Enable/disable LED, one bicolor per port:
- Green—Port is enabled.
- Red—Port has failed.
- Off—Port is disabled.
The enable/disable LEDs are arranged in four groups:
- 0/0 through 0/7
- 1/0 through 1/7
- 2/0 through 2/7
- 3/0 through 3/7
|
Log In