Power supply Cisco C9400-PWR-3200ACT
SKU
C9400-PWR-3200ACT
EAN:
20041
Condition:
new
Stock:
available on order
Lead time:
25-35 days
Hot-pluggable / redundant AC power supply for Catalyst 9400 Series chassis
Category: Networking Accessories
Unique capabilities of a series of switches Cisco Catalyst 9400 provide high protection of your organization before, during and after attack by reliable systems Cisco and encryption MACSEC256.
Switches Cisco 9400 series ensure the use of the Internet of things with a leading industry level. They also provide up to 384 ports up to 60W for UPOE, as well as POE+ and POE, high security, AVB support and IEEE 1588...
Catalyst 9400 Provides high accessibility based on partial updates using technology GIR for safe installation and removal of software and equipment.
Schedule of power supply Cisco C9400-PWR-3200ACT:
| Specification | C9400‑PWR‑3200ACT (Titanium AC Power Supply) |
|---|---|
| Type | Hot-pluggable / redundant AC power supply for Catalyst 9400 Series chassis |
| Output Power | 3,200 W |
| Integrated PoE Support | Yes (supports PoE/PoE+/UPoE/UPoE+ also) |
| Input Voltage Range | 100 – 240 VAC (±10%) at 50/60 Hz (47–63 Hz) |
| Input Current | 17.6 A at 200 VAC (3,200 W rated) |
| AC-Input Frequency | 50/60 Hz nominal (47–63 Hz full range) |
| Efficiency | ≥ 0.90 PF; ≥ 0.95 PF at full load; ~949 BTU/hr heat dissipation |
| Output 55 VDC | 58.0 A @ 230 VAC; 28.36 A @ 115 VAC |
| Output 3.3 VDC | 3.0 A (standby) |
| Output in Redundant Modes | – N+N mode: (3,190 W × N)/2 + 10 W standby – Combined mode: (3,190 W × N) + 10 W standby |
| Holdup Time | ≥ 20 ms |
| Hot-Swap Support | Yes |
| MTBF | ~300,000 hours |
| Branch Circuit Requirement | Dedicated 20 A circuit per supply (North America) |
| Compatibility | Compatible with Catalyst C9404R, C9407R, C9410R chassis |
| Power Cord Connector | IEC 60320 C19 (cords vary by region) |
| Weight | Approx. 4–5 lb (1.8–2.3 kg) |
| Heat Dissipation | ~948.9 BTU/hr (~279 W loss) |
| condition | new |
|---|
Log In