Router Cisco IR1101-K9
1182 $
Cisco IR1101 – a series of routers with integrated services architecture SD-WAN. Routers are designed specifically for use in difficult, extreme conditions, including indoors with aggressive environments..
Series routers CiscoВ IR1101 Resistant to dust, moisture, vibration, electrostatic shock and salt spray. The devices operate effectively under quite extreme conditions from -40 to +60 degrees Celsius.. And if the room is additionally equipped with a source of forced air supply, then the operating temperature can reach + 75 degrees.
Peculiarities
- The modular design of the series allows you to increase productivity
- Programmable operating system with a high level of protection and open API entitled IOS-XE allows you to automate routine workflows and quickly implement new services
- Flexible connectivity redundancy through support LTE on two SIM-slots
- Compliance with industry safety standards, including through technology support Cisco Trust Anchor
- Compact body and low power consumption
- Series devices are built on the basis of software-defined architecture SD-WAN
- Support for many local and cloud management tools
- Support for data migration from legacy control systems
- Network segmentation support
Cisco IR1101 R – unit with a modular design, the main element of which is the base platform, to which an extension module can be integrated, providing increased flexibility of connection.
Such a module is form factor 2U, which is powered by the underlying platform provides local data storage in the form of a removable mSATA SSD module. It also provides backup WAN-Interface, made in the form SFP-interface with support for redundant modules.В В В
Technical characteristics of the routerВ Cisco IR1101-K9:В
|
Feature |
Specification |
|
Memory |
|
|
Default and maximum DRAM |
4 GB |
|
Default and maximum Flash memory |
8 GB (physical) / 4 GB (usable) |
|
Ingress protection rating |
IP30 |
|
Physical characteristics |
|
|
Physical dimensions (H x W x D) В Chassis В Expansion Module |
В В В 2.36 in. x 5.22 in. x 4.92 in. (60 x 132.5 x 124.9 mm) В 1.3 in. x 5.2 in. x 4.9 in. (33 x 132 x 124 mm) |
|
Weight В Chassis В Expansion Module IRM-1100-SPMI: IRM-1100-SP: |
В 2.25 lbs (1.02 kg) В В В В 1.65 lbs (0.75 kg) 1.45 lbs (0.66 kg) |
|
Mounting options |
Panel, wall, and din rail (vertical and horizontal) mount |
|
Power specifications |
Nominal voltage: 12V to 48V DC Minimum and maximum input voltage: 9.6-60V DC Maximum and minimum input current: 1.24A (9.6V DC) and 0.26A (60V DC) |
|
Power consumption |
At idle: 6.6W Typical: 9.8W Maximum: 12W Additional 10W (typical) with expansion module and 2ndВ cellular |
|
Interfaces on the base platform |
|
|
Console |
Mini type-B USB |
|
WAN interfaces |
-В В Combo 10/100/1000 Gigabit Ethernet port (RJ45 and SFP) on the base platform -В В An additional 10/100/1000 Gigabit Ethernet SFP on the expansion module. Refer to Table 8 for supported SFPs -В В LTE: Modular with options for single and dual active LTE and LTE-Advanced |
|
LAN interfaces |
-В В Four 10/100BASE-T Fast Ethernet ports |
|
Input and output |
-В В ALARM input port |
|
LEDs |
-В В System OK -В В Link for Ethernet WAN ports -В В VPN -В В Tricolor user-configurable LED -В В ALARM |
|
Serial interface |
-В В Isolated RS-232 RJ45 DTE port -В В Support for asynchronous mode with speeds up to 115,200 baud |
|
Serial protocols |
SCADA, DNP3, T101-104, Raw Socket TCP, and UDP |
|
Environmental characteristics |
|
|
Environmental operating temperature range |
–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow –40 to 158°F (–40 to 70°C) in a vented cabinet with 40 Linear Feet per Minute (LFM) of air –40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air Type tested at 85°C for 16 hours |
|
Operating altitude |
40В°C up to 13,800 ft (operating) per IEC 68-2-41 |
|
Non-operating shock and vibration |
-В В 50-60G (3.76 m/s minimum) -В В 3-500Hz at 1.12 GRMS (BP at 10 and 100 Hz) |
|
Standard safety certifications |
-В В UL 60950-1, 2В ndВ edition -В В CAN/CSA C22.2 No. 60950-1, 2В ndВ edition -В В EN 60950-1, 2В ndВ edition -В В CB to IEC 60950-1, 2В ndВ edition with all group differences and national deviations |
|
Hazardous locations standards |
-В В ANSI/ISA 12.12.01 (Class 1, Div 2 A-D) -В В CSA 213 (Class 1, Div 2 A-D) -В В IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC) -В В EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC) |
|
Industry standards |
-В В IEC 61850-3 -В В IEEE 1613 |
|
EMC emissions CLASS A |
-В В 47 CFR Part 15 B -В В EN 55032:2015 -В В CISPR 32 Edition 2 -В В CNS13438: 2006 -В В EN 300 386 V1.6.1 -В В ICES-003 Issue 6: 2016 -В В KN 32: 2015 -В В TCVN 7189: 2009 -В В V-2/2015.04 -В В V-3/2015.04 -В В AS/NZ CISPR32 |
|
EMC immunity |
-В В EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29 -В В CISPR24: 2010 + A1: 2015 -В В EN 300 386 V1.6.1 -В В EN 55024: 2010 + A1: 2015В -В В EN 55035:2017 -В В KN35: 2015 -В В TCVN 7317:2003 -В В QCVN 18:2014 |
В
| condition | new |
|---|
Log In