A series of industrial routers from an American multinational corporation Cisco enable users of mobile operating devices to transform, move from one network to another while maintaining their permanent IP address. The devices allow you to provide roaming over several wireless networks at once, which can cover colossal territories and areas with their influence..
Industrial routers Cisco Easily support integrated wireless LAN (WLAN) corporate level in an individual and spontaneous, offline mode. Options MIMO 2X2 802.11a/b/g/n recreate a spontaneously renewable network WLAN.
By means of dual radio communication, the built-in access point can perform as its immediate tasks (access point), and serve as a client for a wireless home or corporate network. The function specially developed and integrated into the functionality of industrial routers Cisco ClientLink directly at access points increases the area and reliability of coverage.
DFS – dynamic frequency selection, which is also equipped with devices from this line, makes it possible to identify and detect radars and perform a set of measures to avoid and combat them. IR829 – a universal function that allows routers to simultaneously support a 4G LTE global wireless network and a WLAN intermediate backhaul network at once with two modules on one core platform.
The industrial router series includes:
- Integrated LTE;
- Wi-Fi double type;
- storage function SSD mSATA;
- Ethernet ports with support PoE, SFP and serial port.
Embedded LTE connectivity is used for optional WAN redundancy and redistribution of applied loads. It is worth noting that each of the modems is capable of supporting 4 or 3 G multimode, for all operators that operate in:
- FDD LTE: 2100 MHz - band 1, 1900 MHz - lane 2, lane 25, 1800 MHz - band 3, 1700 MHz - band 4, 850 MHz -lane 5, lane 26, 2600 MHz - band 7, 700 MHz - lane 12, lane 13, lane 29, 800 MHz - band 20, 1900 MHz – band 25, 850 MHz - band 26, 700 MHz - band 29;
- TDD LTE 2500 MHz - band 41.
SSD-memory storage mSATA can be inserted into a dedicated storage slot of a state of the art innovative high speed drive to add a storage sector to the model IR829M.
Router Specifications Cisco IR1835-K9:
|
Datasheet Cisco IR1835-K9
|
|
Hardware
|
|
Memory
|
8 GB
|
|
Flash
|
8 GB
|
|
Pluggable slots (cellular)
|
2
|
|
Wide pluggable slot (Wi-Fi)
|
1
|
|
CAN bus
|
✓
|
|
Ignition power management
|
✓
|
|
Gigabit Ethernet (GE) LAN (x4)
|
✓
|
|
Combo RJ-45/SFP GE WAN port (L3) (x1)
|
✓
|
|
Micro USB console
|
✓
|
|
Power over Ethernet (PoE)/PoE+
|
✓
|
|
SSD slot
|
✓
|
|
Automotive dead reckoning GNSS slot
|
–
|
|
Digital I/O (x4)
|
✓
|
|
Serial interface
|
1x RS-232, 1x RS245/RS232
|
|
Physical specifications
|
|
Dimensions
|
2.20 x 11.04 x 8.06 in. (55.9 x 280.4 x 204.7 mm)
|
|
Weight
|
2.4 kg (5.3 lb)
|
|
IP rating
|
IP40
|
|
Mounting options
|
DIN rail
Panel moun
|
|
Power specifications
|
|
Power input
|
- Nominal voltage: +12V and +24V
- Minimum and maximum input voltage: 9V - 36V
- Maximum and Minimum input current: 7.56A - 1.99
|
|
Power consumption
|
- At idle: 16W (at 12V), 17W (at 24V)
- Typical: 22W (at 12V), 23W (at 24V)
- Maximum: 27W (without PoE), 71W (with PoE
|
|
Environmental
|
|
Environmental operating temperature range
|
–40° to 140°F (–40° to 60°C) in a sealed NEMA cabinet with no airflow
–40° to 158°F (–40° to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air
–40° to 167°F (–40° to 75°C) in a forced air enclosure with 200 LFM of air
Type tested at 85°C for 16 hours
Refer to the IR1800 Hardware Installation Guide (HIG) for the operating temperature range for pluggable cellular modules and wide pluggable Wi-Fi module
|
|
Operating altitude
|
Maximum altitude: 13.800 ft per IEC 68-2-41
|
Log In