Router Cisco IR807G-LTE-GA-K9

SKU
IR807G-LTE-GA-K9
€1,539.00
EAN: 16493
Condition: new
Stock: available on order
Lead time: 25-35 days
GPL price:

1800 $

807 Low-power Industrial ISR, 4G/LTE multimode for Europe

Cisco 800 – a series of high-performance routers that provide a high level of security and reliability, thanks to the integrated ON Cisco IOS.

Routers of this line are used in networks of up to 20 users, providing them with full access to the Internet or to a corporate network through ISDN or Serial channels.

Applying Serial the port will fashionably connect to the network using technology Frame Relay or individual leased lines at speeds up to 512 Kbit/with. Through the channel Serial you can also connect to the Internet using the technology dial-up at speeds up to 144 Kbit/with.

Technical features:

  • ON FastStep allows you to install and configure the router in a few minutes;
  • support ON ConfigMaker For driving;
  • technology support Lock and Key, providing temporary access through a firewall after user authorization;
  • standard security features include support PAP, CHAP, MS-CHAP, PAN/NAT, Access Lists;
  • providing additional security using IOS Firewall and IPSec;
  • work with virtual private networks (VPN);
  • support DHCP, Multilink PPP;
  • optimization functions: compression, bandwidth on demand, routing on demand;
  • support CAPI applications

To the features of the series routers Cisco 800 can be attributed to compactness and ergonomics, they provide advanced security features. В 

Technical characteristics of the routerВ Cisco IR807G-LTE-GA-K9:В 

Feature

Specification

Memory

В 

Default and maximum DRAM

1 GB

Default and maximum flash memory

4 GB

IP rating

IP30

Physical characteristics

В 

Physical dimensions (H x W x D)

1.84” x 5.07” x 4.37” (46.74 x 128.78 x 110.99 mm)

Weight

1 lb 5 oz. (0.6 kg)

Mounting options

Panel, wall, and DIN rail (vertical and horizontal) mount

Power consumption

At idle: 4.5W

Typical: 6.7W

Maximum: 10W

Interface support

Console

Mini type-B USB

WAN interfaces

WWAN with multimode 4G LTE, 3.7G, 3.5G, 3G, and 2G speeds; IR807G-LTE-VZ-K9 does not support 3G and 2G. IR807G-LTE-NA-K9 does not support 2G

LAN and WAN interfaces

Two 10/100BASE-T fast Ethernet ports

LEDs

-В В В System OK

-В В В WWAN

-В В В Link for Ethernet WAN ports

-В В В GPS

-В В В RSSI

-В В В VPN

-В В В User-configurable LED

-В В В SIM presence

-В В В ALARM

Serial interface

-В В В 2 isolated RS-232 ports

-В В В Support for asynchronous mode with speed up to 115,200 baud

Serial protocol support

SCADA, DNP3, T101-104, Raw Socket TCP and UDP, and SLIP

Diagnostics

Mini type-B USB for remote cellular WAN diagnostics and monitoring

Environmental characteristics

Environmental operating temperature range

–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow

–40 to 158°F (–40 to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air

–40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air

Type tested at 85В°C for 16 hours

Operating altitude

50?C up to 5000 ft (above 5000 ft derate maximum operating temperature 1.50В°C per 1000 ft)

Maximum altitude: 10,000 ft

Standard safety certifications

-В В В UL 60950-1, 2В ndВ edition

-В В В CAN/CSA C22.2 No. 60950-1, 2В ndВ edition

-В В В EN 60950-1, 2В ndВ edition

-В В В CB to IEC 60950-1, 2В ndВ edition with all group differences and national deviations

Hazardous locations standards

-В В В ANSI/ISA 12.12.01 (Class 1, Div 2 A-D)

-В В В CSA 213 (Class 1, Div 2 A-D)

-В В В IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC)

-В В В EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC)

Industry standards

-В В В IEC 61850-3

-В В В IEEE 1613

EMC emissions

FCC 47 CFR Part 15 Subpart C Class A

EN 55032/CISPR 32 Class A, EN 55022 Class A

CISPR 11 Class A, ICES 003 Class A, CNS 13438 Class A

EN 300 386

EMC immunity

CISPR 35, EN 55024

EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29

Radio cellular

EN 301 908 -1, 2, and 13

EN 301 511

FCC 47 CFR Part 22

FCC 47 CFR Part 15 Subpart C

FCC 47 CFR Part 2 MPE

RSS 102/247

Power specifications

Minimum and maximum voltage: 9.6 to 60V DC input

Maximum and minimum current: 1.04A (9.6V DC) and 0.17A (60V DC)

В 

В 

condition new
Your Rating