Router Cisco IR807G-LTE-NA-K9
1800 $
Cisco 800 – a series of high-performance routers that provide a high level of security and reliability, thanks to the integrated ON Cisco IOS.
Routers of this line are used in networks of up to 20 users, providing them with full access to the Internet or to a corporate network throughВ ISDNВ orВ Serial channels.
ApplyingВ SerialВ the port will fashionably connect to the network using technology Frame Relay or individual leased lines at speeds up to 512 Kbit/with. Through the channelВ SerialВ you can also connect to the Internet using the technologyВ dial-upВ at speeds up to 144 Kbit/with.
Technical features:
- ON FastStepВ allows you to install and configure the router in a few minutes;
- supportВ ON ConfigMakerВ For driving;
- technology supportВ Lock and Key, providing temporary access through a firewall after user authorization;
- standard security features include supportВ PAP, CHAP, MS-CHAP, PAN/NAT, Access Lists;
- providing additional security usingВ IOS Firewall and IPSec;
- work with virtual private networks (VPN);
- supportВ DHCP, Multilink PPP;
- optimization functions: compression, bandwidth on demand, routing on demand;
- supportВ CAPIВ applications
To the features of the series routersВ Cisco 800В can be attributed to compactness and ergonomics, they provide advanced security features. В
Technical characteristics of the routerВ Cisco IR807G-LTE-NA-K9:В
|
Feature |
Specification |
|
Memory |
В |
|
Default and maximum DRAM |
1 GB |
|
Default and maximum flash memory |
4 GB |
|
IP rating |
IP30 |
|
Physical characteristics |
В |
|
Physical dimensions (H x W x D) |
1.84” x 5.07” x 4.37” (46.74 x 128.78 x 110.99 mm) |
|
Weight |
1 lb 5 oz. (0.6 kg) |
|
Mounting options |
Panel, wall, and DIN rail (vertical and horizontal) mount |
|
Power consumption |
At idle: 4.5W Typical: 6.7W Maximum: 10W |
|
Interface support |
|
|
Console |
Mini type-B USB |
|
WAN interfaces |
WWAN with multimode 4G LTE, 3.7G, 3.5G, 3G, and 2G speeds; IR807G-LTE-VZ-K9 does not support 3G and 2G. IR807G-LTE-NA-K9 does not support 2G |
|
LAN and WAN interfaces |
Two 10/100BASE-T fast Ethernet ports |
|
LEDs |
-В В В System OK -В В В WWAN -В В В Link for Ethernet WAN ports -В В В GPS -В В В RSSI -В В В VPN -В В В User-configurable LED -В В В SIM presence -В В В ALARM |
|
Serial interface |
-В В В 2 isolated RS-232 ports -В В В Support for asynchronous mode with speed up to 115,200 baud |
|
Serial protocol support |
SCADA, DNP3, T101-104, Raw Socket TCP and UDP, and SLIP |
|
Diagnostics |
Mini type-B USB for remote cellular WAN diagnostics and monitoring |
|
Environmental characteristics |
|
|
Environmental operating temperature range |
–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow –40 to 158°F (–40 to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air –40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air Type tested at 85°C for 16 hours |
|
Operating altitude |
50?C up to 5000 ft (above 5000 ft derate maximum operating temperature 1.50В°C per 1000 ft) Maximum altitude: 10,000 ft |
|
Standard safety certifications |
-В В В UL 60950-1, 2В ndВ edition -В В В CAN/CSA C22.2 No. 60950-1, 2В ndВ edition -В В В EN 60950-1, 2В ndВ edition -В В В CB to IEC 60950-1, 2В ndВ edition with all group differences and national deviations |
|
Hazardous locations standards |
-В В В ANSI/ISA 12.12.01 (Class 1, Div 2 A-D) -В В В CSA 213 (Class 1, Div 2 A-D) -В В В IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC) -В В В EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC) |
|
Industry standards |
-В В В IEC 61850-3 -В В В IEEE 1613 |
|
EMC emissions |
FCC 47 CFR Part 15 Subpart C Class A EN 55032/CISPR 32 Class A, EN 55022 Class A CISPR 11 Class A, ICES 003 Class A, CNS 13438 Class A EN 300 386 |
|
EMC immunity |
CISPR 35, EN 55024 EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29 |
|
Radio cellular |
EN 301 908 -1, 2, and 13 EN 301 511 FCC 47 CFR Part 22 FCC 47 CFR Part 15 Subpart C FCC 47 CFR Part 2 MPE RSS 102/247 |
|
Power specifications |
Minimum and maximum voltage: 9.6 to 60V DC input Maximum and minimum current: 1.04A (9.6V DC) and 0.17A (60V DC) |
В
В
| condition | new |
|---|
Log In