Router Cisco IR829-2LTE-EA-EK9
4536 $
Cisco 800 – a series of high-performance routers that provide a high level of security and reliability, thanks to the integrated ON Cisco IOS.
Routers of this line are used in networks of up to 20 users, providing them with full access to the Internet or to a corporate network throughВ ISDNВ orВ Serial channels.
ApplyingВ SerialВ the port will fashionably connect to the network using technology Frame Relay or individual leased lines at speeds up to 512 Kbit/with. Through the channelВ SerialВ you can also connect to the Internet using the technologyВ dial-upВ at speeds up to 144 Kbit/with.
Technical features:
- ON FastStepВ allows you to install and configure the router in a few minutes;
- supportВ ON ConfigMakerВ For driving;
- technology supportВ Lock and Key, providing temporary access through a firewall after user authorization;
- standard security features include supportВ PAP, CHAP, MS-CHAP, PAN/NAT, Access Lists;
- providing additional security usingВ IOS Firewall and IPSec;
- work with virtual private networks (VPN);
- supportВ DHCP, Multilink PPP;
- optimization functions: compression, bandwidth on demand, routing on demand;
- supportВ CAPIВ applications
To the features of the series routersВ Cisco 800В can be attributed to compactness and ergonomics, they provide advanced security features. В
Technical characteristics of the routerВ Cisco IR829-2LTE-EA-EK9:В
|
Feature |
Specification |
|
Memory |
|
|
Default and maximum DRAM |
2 GB |
|
Default and maximum flash memory |
8 GB eMMC (4GB usable) |
|
SSD storage |
100 GB (IR-SSD-MSATA-100G) and 50 GB (IR-SSD-MSATA-50G) option on IR829M |
|
IP rating |
IP40 |
|
Interface Support |
|
|
Console |
-В В Mini type-B: also supports remote 4G LTE diagnostics and monitoring tools |
|
WAN interfaces |
-В В Wireless WAN with multimode 4G LTE, 3.7G, 3.5G, 3G and 2G speeds -В В SFP for copper and fiber options at 100 Mbps Fast Ethernet and 1000 Mbps Gigabit Ethernet speeds |
|
802.11n Wi-Fi wireless interface |
-В В 2x2 (2.4GHz) 802.11n MIMO and 2x2 (5GHz) 802.11n MIMO -В В Up to 300 Mbps data rate per radio -В В Autonomous and Universal modes |
|
WLAN features |
-В В 2 x 2 Multiple-Input Multiple-Output (MIMO) with two spatial streams -В В Maximal Ratio Combining (MRC) -В В Legacy beamforming -В В 20- and 40-MHz channels -В В PHY data rates up to 300 Mbps -В В Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) -В В 802.11 Dynamic Frequency Selection (DFS) -В В Cyclic Shift Diversity (CSD) support |
|
LAN interfaces |
-В В Four 10/100/1000 Gigabit Ethernet ports with option for 30W of PoE/PoE+ -В В IEEE 802.1Q VLANs -В В Power over Ethernet (30W of PoE/PoE+ shared across the four Gigabit Ethernet interfaces) |
|
Serial interface |
-В В 1 RS-232 (DTE) and 1 RS-232/RS-485 (DCE) -В В Supports asynchronous modes |
|
Serial protocol support |
-В В Raw socket over TCP and UDP, SLIP, DNP3 and T101-104 translations, IOx |
|
Physical Characteristics |
|
|
Physical dimensions (HВ xВ W x D) |
1.73 x 11 x 7.7 in. (43.9 x 279 x 196 mm) |
|
Weight |
4.5 lbs. (2 kg) |
|
Mounting options |
Panel/door mount |
|
Mean Time Between Failure (MTBF - ground begin) |
322,390 hours (in a fixed environment with PoE module) |
|
Maximum platform power consumption |
40 Watts without PoE and 70 Watts with PoE |
|
Environmental operating range |
-40В° to 140В°F (-40В° to 60В°C) in a sealed NEMA cabinet with no airflow -40В° to 158В°F (-40В° to 70В°C) in a vented cabinet with 40 lfm of air -40В° to 167В°F (-40В° to 75В°C) in a forced air enclosure with 200 lfm of air |
|
Operating altitude |
Maximum altitude: 13.800 ft. |
|
Mechanical and Environmental Standards |
Industrial: EN61131-2 Railway: EN50155:2007 (Clause nr# 12.2.1, 12,2.3, 12.2.4, 12.2.5, 12.2.7, 12.2.8, 12.2.11) Marine: EN60945, DNV Marine Standard for Certification No 2.4 Automotive: SAEJ1455 2b3, 2c, 3a4, 3b Military: MIL-STD-810G -  Method 514.6: Procedure 1 Category 4, Secured Cargo – Common -  Method 514.6: Procedure 1 Category 20, Ground Vehicles -  Method 516.6. Procedure 1, Functional Shock -  Method 516.6. Procedure 5, Crash Hazard -  Method 516.6. Procedure 6, Bench Handling |
|
EMC-Emissions CLASS A |
47 CFR Part 15 B EN 55032:2015 CISPR 32 Edition 2 CNS13438: 2006 EN 300 386 V1.6.1 EN61000-3-2: 2014 (AC Power Supply) EN61000-3-3: 2013 (AC Power Supply) ICES-003 Issue 6: 2016 KN 32: 2015 TCVN 7189: 2009 V-2/2015.04 V-3/2015.04 |
|
EMC-Immunity |
CISPR24: 2010 + A1: 2015 EN 300 386 V1.6.1 EN 55024: 2010 + A1: 2015 EN 55035: 2017 KN35: 2015 TCVN 7317:2003 QCVN 18:2014 |
|
Radio-WiFi |
FCC Part 15.407 FCC Part 15.247 RSS 247 FCC Part 2.1091 (MPE) RSS 102 (RF Exposure) EN 300 328 v2.1.1 EN 301 893 v2.1.1 EN 62311 (RF Exposure) AS/NZ 4268:2017 MIC Article -19, 19-3.2, 19-3 MIC Article 2, 9 NCC LP0002:2018 KCC Article 13:2013 EN 300 328 v1.9.1 EN 301 893 v1.8.1 EN 301 489 – 1,17 |
|
Radio-Cellular |
FCC 47 CFR Part 22,24,27 RSS 102, 132, 133 AS/NZ ACMA EMR, AS/CA S042.1, 4 MIC Article 2 Paragraph 1, Item 11-3,7,19 EN 301 908-1,2,13 EN 301 511 EN 301 489 -1, 52 v2.1.1 EN 301 489 – 1,3,7,24 |
|
GPS |
EN 303 413 v1.1.1 EN 301 489 – 1,19 |
|
Railway |
EN 50121-3-2:2016 EN 50121-4:2016 EN 50155:2007 (Clause nrs: 12.2.1, 12.2.3-12.2.5, 12.2.7-12.2.8, 12.2.11, 12.2.14) |
|
ITE-Safety |
UL/CSA 60950-1 EN 60950-1 IEC 60950-1 CB with all country deviations |
|
Hazardous Locations |
UL 121201 CSA 213 UL/CSA 60079-0, -15 IEC 60079-0, -15 IECEx Test Report EN 60079-0, -15 ATEX Certificate |
|
Power requirement |
Nominal voltage: 12V, 24V DC Min/max voltage: 9-32V DC input Max/Min current: 7.8A, 2.2A |
В
В
| condition | new |
|---|
Log In