Router Cisco NCS-6008-SYS-S
535500 $
Routers Cisco NCS 6000 series offer exceptional network agility, packet optical convergence and petabit per second scale systems. Series Cisco NCS 6000 also facilitates the creation of a next-generation core to support elastic capacity at a low total cost of ownership and to deliver high-bandwidth mobile, video, and cloud services.
Industry-leading use Cisco IOS ® operating system XR, works in a virtual environment, Cisco NCS 6000 Series promotes the concept of distributed routing and virtualization. Using virtualized Cisco IOS XR, Cisco NCS 6000 Series offers new levels of programmability and virtualization to support a wide range of new offerings, speed up provisioning and increase network efficiency.
Specifications Router CiscoNCS-6008-SYS-S:
eature |
Description |
|
Software compatibility |
Cisco IOS XR Software Release 5.0 or later running in the Cisco nVisor environment |
|
Protocols |
- Cisco Discovery Protocol - IPv4 and IPv6 addressing - Internet Control Message Protocol (ICMP) - Layer 3 routing protocols, including Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First Version 2 (OSPFv2), OSPFv3, and Intermediate System-to-Intermediate System (IS-IS) Protocol - Multicast forwarding with support for source-based and shared distribution trees and the following protocols: ? Protocol Independent Multicast Sparse Mode (PIM-SM) ? Bi-directional PIM (Bidir-PIM) ? PIM Source Specific Multicast (PIM SSM) ? Automatic route processing (AutoRP) ? Internet Group Management Protocol (IGMP) versions, 2 and 3 ? Multiprotocol BGP (MBGP) ? Multicast Source Discovery Protocol (MSDP) - Multiprotocol Label Switching (MPLS) ? MPLS Label Distribution Protocol (LDP) ? Resource Reservation Protocol (RSVP) ? Diffserv Aware Traffic Engineering (TE) - MPLS Traffic Engineering control plane (RFCs 2702 and 2430) - Segment Routing - Route Policy Language (RPL) - MPLS Traffic Engineering control plane - Management: ? Simple Network Management Protocol (SNMP) ? Programmatic interfaces (XML) ? Model Driven Telemetry ? Netconf/Yang - Security ? Message Digest Algorithm (MD5) ? IP Security (IPsec) Protocol ? Secure Shell Protocol Version 2 (SSHv2) ? Secure FTP (SFTP) ? Secure Sockets Layer (SSL) - Ethernet ? 100 Gigabit Ethernet IEEE 802.3 ? 40 Gigabit Ethernet IEEE 802.3 ? 10 Gigabit Ethernet IEEE 802.3 ? Support for short- and long-reach IEEE standards |
|
Components |
Each Cisco NCS 6008 line card chassis includes: - Standalone chassis (no rack required) - 2 route processors - 6 fabric cards - 8 line card slots - 2 fan trays - Air inlet filter - 6 power shelves (DC or AC) |
|
Fabric Cards |
- 6 Fabric cards support 5+1 redundancy - System can sustain more than one fabric card failure - Universal Fabric card (2T & 1T) OR Single-chassis Fabric Card (1T) - Universal Fabric card OR Multi-chassis Fabric card (legacy option). 16 optical connections to the Cisco NCS 6000 Series Fabric Chassis |
|
Line cards |
100-G line cards - 20 x 100 Gigabit Ethernet -multiservice cards with combo optics (CPAK & QSFP) - 20 x 100 Gigabit Ethernet LSR cards with combo optics (CPAK & QSFP) - 10 x 100 Gigabit Ethernet -multiservice cards with CPAK optics - 10 x 100 Gigabit Ethernet LSR cards with CPAK optics 10-G line cards - 60 x 10 - Gigabit Ethernet multiservice cards with Enhanced Small Form-Factor Pluggable (SFP+) optics - 60 x 10 - Gigabit Ethernet LSR cards with Enhanced Small Form-Factor Pluggable (SFP+) optics |
|
Connectivity |
100 and 10 Gigabit Ethernet on 100-Gbps line cards using breakout or patch panel solutions |
|
Features and functions |
IP features: - IPv4 unicast services - IPv6 unicast services - IPv4/IPv6 equal-cost multipathing (ECMP) - IPv4/IPv6 load balancing) Forwarding features: - Access control lists (ACLs) - Qos and class of service (CoS) using modular QoS command-line interface (CLI; MQC) - IP packet classification and marking - Queuing (ingress and egress) - Policing (ingress and egress) - Diagnostic and network management support |
IPv4 multicast features: - Multicast reverse path forwarding (RPF) - Multicast nonstop forwarding (NSF) - Multicast forwarding information base (MFIB) MPLS features: - MPLS forwarding - MPLS load balancing - User network interface (UNI) - Link management protocol (LMP) Security features: - Control packet policing - Dynamic control plane protection - GTSM RFC 3682 (formerly BTSH) |
System capacity |
4 Tbps per line card capability (2 Tbps per slot ingress and 2 Tbps per slot egress) for a total switching capacity of 32 Tbps in a Single Chassis configuration Up to 1Pbps total switching capacity in a multi-chassis configuration |
|
Reliability and availability |
System redundancy: - Power redundancy 1:1 or 1:N - Fan tray redundancy 1:1 - Route processor redundancy 1:1 - Fabric card redundancy 1:6 Software features: - NSF using graceful restart for IS-IS, OSPF, BGP, LDP, and RSVP - Line-card online insertion and removal (OIR) support - Fabric card OIR support - Out of resource management - Virtual machine redundancy - MPLS Fast Reroute (FRR) - Hot Standby Router Protocol (HSRP) and Virtual Router Redundancy ProtocolVRRP) |
|
MIBs |
SNMP framework support: - SNMPv1 - SNMPv2c - SNMPv3 - MIB II, including interface extensions (RFC 1213) - SNMP-FRAMEWORK-MIB - SNMP-TARGET-MIB - SNMP-NOTIFICATION-MIB - SNMP-USM-MIB - SNMP-VACM-MIB System management: - CISCO- BULK-FILE-MIB - CISCO-CONFIG-COPY-MIB - CISCO-CONFIG-MAN-MIB - CISCO-FLASH-MIB - CISCO-MEMORY-POOL-MIB - Cisco FTP Client MIB - Cisco Process MIB - Cisco Syslog MIB - CISCO-SYSTEM-MIB - CISCO-CDP-MIB - IF-MIB (RFC 2233/RFC 2863) QoS: - MQC-MIB (Cisco Class-Based QoS MIB) - CISCO-PING-MIB |
Chassis: - ENTITY-MIB (RFC 2737) - CISCO-entity-asset-MIB - CISCO-entity-sensor-MIB - CISCO-FRU-MIB (Cisco-Entity-FRU-Control-MIB) Fabric: - CISCO-Fabric-Mcast-MIB - CISCO-Fabric-Mcast-Appl-MIB Routing protocols: - BGP4-MIB Version 1 - OSPFv1-MIB (RFC 1253) - CISCO-IETF-IP-FORWARDING-MIB - IP-MIB (was RFC 2011-MIB) - TCP-MIB (RFC 2012) - UDP-MIB - CISCO-HSRP-EXT-MIB - CISCO-HSRP-MIB Traps: - RFC 1157 - Authentication - Linkup - Linkdown - ColdstartWarmstart |
Network management |
Enhanced CLI XML interface Simple Network Management Protocol (SNMP) and MIB support Cisco Prime™ Network Netconf/Yang Model Driven Telemetry |
|
Programmatic interfaces |
XML schema support |
|
Physical dimensions |
Chassis height: - 84 in. (213.36 cm) Chassis width: - 23.6 in. (59.94 cm) Chassis depth: (inclusive of external cosmetic doors) - 42 in. (106.68 cm) |
|
Power |
- Support for both DC and AC power modules[1] (AC ranges:200-240V; 50-60 Hz; 16A maximumWorldwide ranging DC (-40 to?-72V; 50A nominal, and 60A maximum) |
|
Environmental conditions |
Storage temperature: -40 to 158°F (-40 to 70°C) Operating temperature: - Normal: 41 to 104°F (5 to 40°C) - Short term*: 23 to 122°F (-5 to 50°C) (see note) Relative humidity: - Normal: 5 to 85% - Short-term*: 5 to 90% but not to exceed 0.024 kg water per kg of dry air |
condition | new |
---|
Log In