Routers Juniper ACX4000 - these are universal access devices, services for corporate and operator networks TDM or Ethernet, have a modular and fixed architecture and complement the universal service boundary solution. The entire line is managed Junos.
Access Router Juniper ACX4000 has a form factor 2,5 RU, active cooling system and environmental protection. Router ACX4000 has two slots for modular interface cards (MIC), who can support 16 ports T1/E1, 6 toMbinsulated copper optical ports GbE or 4 port CHOC3/STM-1. This creates a mobile access platform that is flexible enough for any deployment..In addition to two slots MIC, this platform also has a number of fixed ports: 2 port 10GbE, 2 port GbE SFP, 8 combo toMbinsulated copper optical ports GbE.
Key Benefits Juniper ACX4000 is the performance 60 Gbit/with, Seamless MPLS, Synchronization (IEEE 1588, SyncE), Monitoring Latency, jitter, OAM, Passive cooling with 65W support Power over Ethernet (PoE+), L3 and L2VPN, TDM/ATM, IP/MPLS, QoS etc..
Technical characteristics of the router Juniper ACX4000BASE-AC:
|
System Throughput
|
Up to 60 Gbps
|
|
Interface Support
|
8xGbE Combo (Copper/Fiber) (with PoE++ on two ports)
2xGbE SFP
2x10GbE SFP+
2.5 RU
ETSI 300
2 MIC slots with MIC options:
6xGbE Combo (Copper or SFP)
4xCHOC3/STM-1/1xCHOC12/STM-4
16x T1/E1
|
|
Dimensions (W x H x D)
|
17.5 x 4.375 x 9.25 in (44.5 x 11 x 23.5 cm)
|
|
Maximum Weight
|
23.8 lb (10.82 kg) (Fully configured 2 PSU, 2MICs)
|
|
Power (DC)
|
-48V telco nominal or
-60V telco nominal or
+24 VDC nominal
|
|
Power (AC)
|
90 to 240 Volt AC
|
|
Power Draw
|
150W w/o MICs; 45W for each MIC; 65W for each PoE++ port
|
|
Humidity
|
95% RH noncondensing
|
|
Noise level
|
33dBA at 27 degrees ambient temperature
|
|
Operating Temperature
|
-40° to 158° F (-40° to 70° C)
|
Log In