Router Juniper ACX4000BASE-DC
19391 $
Routers Juniper ACX4000 - these are universal access devices, services for corporate and operator networks TDM or Ethernet, have a modular and fixed architecture and complement the universal service boundary solution. The entire line is managed Junos.
Access Router Juniper ACX4000 has a form factor 2,5 RU, active cooling system and environmental protection. Router ACX4000 has two slots for modular interface cards (MIC), who can support 16 ports T1/E1, 6 toMbinsulated copper optical ports GbE or 4 port CHOC3/STM-1. This creates a mobile access platform that is flexible enough for any deployment..In addition to two slots MIC, this platform also has a number of fixed ports: 2 port 10GbE, 2 port GbE SFP, 8 combo toMbinsulated copper optical ports GbE.
Key Benefits Juniper ACX4000 is the performance 60 Gbit/with, Seamless MPLS, Synchronization (IEEE 1588, SyncE), Monitoring Latency, jitter, OAM, Passive cooling with 65W support Power over Ethernet (PoE+), L3 and L2VPN, TDM/ATM, IP/MPLS, QoS etc..
Technical characteristics of the router Juniper ACX4000BASE-DC:
|
System Throughput |
Up to 60 Gbps |
|
Interface Support |
8xGbE Combo (Copper/Fiber) (with PoE++ on two ports) |
|
Dimensions (W x H x D) |
17.5 x 4.375 x 9.25 in (44.5 x 11 x 23.5 cm) |
|
Maximum Weight |
23.8 lb (10.82 kg) (Fully configured 2 PSU, 2MICs) |
|
Power (DC) |
-48V telco nominal or |
|
Power (AC) |
90 to 240 Volt AC |
|
Power Draw |
150W w/o MICs; 45W for each MIC; 65W for each PoE++ port |
|
Humidity |
95% RH noncondensing |
|
Noise level |
33dBA at 27 degrees ambient temperature |
|
Operating Temperature |
-40° to 158° F (-40° to 70° C) |
| condition | new |
|---|
Log In