Switch Arista DCS-7020SR-24C2-F
12995 $
Arista 7020SR, 24x10GbE (SFP+) and 2 x 100GbE switch, front-to-rear air, 2xAC, 2xC13-C14 cords
Series Arista 7020R intended for use in network infrastructures where stability, energy efficiency, and support for scalable routing are critical. These switches are focused on the task of aggregation, connection of storage facilities and the construction of the infrastructure of distributed date centers, including the use as marginal or distribution devices in highly executed systems. Support for interfaces 1/10 Gigabit Ethernet makes this line the optimal choice for upgrading access and aggregation networks with the ability to integrate into modern architectures.
The hardware base is built on Broadcom productive chips with integrated core routing and maintaining rich protocol set. This ensures a stable transmission of data with minimal delays even when working with a large number of sessions and active routes. Ruler Arista 7020R Includes high port density models and the ability to install in a compact form factor (1RU), which is especially relevant for projects with limited space.
Devices run under the control of an operating system Arista EOS, which provides access to advanced management, automation, and monitoring tools. Support for protocols BGP, OSPF, IS-IS, EVPN and VXLAN Allows you to integrate equipment into multi -core environments and build virtualized networks with flexible traffic routing. Thanks to technology Stateful Fault Repair and architecture with the division of management and data processing achieved high resistance to failures and failures.
Special attention in the series 7020R attention to energy efficiency and reduction operating costs. The use of low -power components combined with intellectual cooling allows to reduce electricity consumption without sacrificing productivity. The presence of spawn power supplies and fans with the possibility of hot replacement guarantees the continuous operation of the equipment and simplifies maintenance.
International certificates confirm the compliance of equipment with safety, reliability and environmental standards requirements. Series Arista 7020R Demonstrates a balanced approach between productivity and cost optimization, providing stable operation within a flexibly scaled architecture of the Enterprise level and service providers.
Specifications of the switch DCS-7020SR-24C2-F:
| Category | Specification |
|---|---|
| Model | DCS-7020SR-24C2-F |
| Series | 7020SR Series |
| Form Factor | 1U |
| Airflow | Front-to-Rear |
| Port Configuration | 24 x 10G SFP+ ports, 2 x 100G QSFP100 uplink ports |
| Maximum Ports | 24 x 10GbE, 2 x 100GbE or 8 x 25GbE (via breakout) |
| Switching Capacity | 1.76 Tbps |
| Forwarding Rate | ~1.3 billion packets per second (Bpps) |
| Latency | < 3 microseconds |
| Buffer Memory | 16 MB dynamic shared packet buffer |
| CPU | Dual-core x86 processor |
| System Memory (RAM) | 4 GB RAM |
| Flash Storage | 4 GB |
| Management Ports | 1 x 10/100/1000 Management (RJ-45), 1 x Serial Console, 1 x USB |
| Power Supplies | Dual redundant, hot-swappable 460W AC (Platinum efficiency) |
| Cooling Fans | 4 x hot-swappable fans with N+1 redundancy |
| Typical Power Draw | ~150W |
| Maximum Power Draw | 250W |
| Dimensions (W x H x D) | 19" x 1.75" x 16" (48.3 x 4.4 x 40.6 cm) |
| Weight | ~15.4 lbs (7 kg) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -25°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Operating Altitude | Up to 10,000 ft (3,000 m) |
| Layer 2 Features | 802.1Q VLAN, STP/RSTP/MSTP, LACP, MLAG, Jumbo Frames |
| Layer 3 Features | Static Routing, OSPF, BGP, VRF, ECMP, IPv4/IPv6 |
| Advanced Features | VXLAN, QoS, Access Control Lists (ACLs), CoPP |
| Management & Automation | EOS (Arista Extensible Operating System), eAPI, SNMP, ZTP, CloudVision |
| Telemetry & Monitoring | LANZ, sFlow, OpenConfig, streaming telemetry |
| Compliance & Standards | CE, FCC, UL, RoHS |
| Minimum EOS Version | 4.20.10M or later |
| condition | new |
|---|

Log In