Switches Aruba (Hewlett Packard Enterprise) offer to choose the optimal solution in terms of functionality and price for a task of any scale. Available in L2 and L3 models, modular switches, fixed configuration devices. All functionality is available immediately, no additional licenses required.
Core switches presented modular chassis 8400 and 5400 series, which are characterized by high performance, fault tolerance, a wide range of supported network protocols and the ability to install service modules.
Access switches represented by models with a wide range of supported network protocols, stacking support. The main lineup is represented by devices for 24 and 48 ports 10/100/1000 GigEthernet with the possibility of support PoE, or optical switches with SFP ports, as well as uplink interfaces SFP+ or QSFP+. The FlexNetwork line features enhanced support for dynamic routing protocols, IPv6 and MPLS.
Hewlett Packard Enterprise provides customers with a complete line of campus network products based on the operating system ArubaOS. Switches on OS ArubaOS Convenient in deployment and operation. It is possible to integrate with modern management and security tools Aruba ClearPass Policy Manager, Aruba AirWave and cloud service Aruba Central, optimized for software-defined networks (SDN) technology-enabled OpenFlow. The key features of the new operating system include working in tunneling mode, device profiling, support SmartRate, ZTP (Zero Touch Provisioning) and support of control systems (Aruba Activate, Central and AirWave), differentiation of user access by roles using Aruba CPPM (ClearPass Policy Manager), Access OSPF for access switches, etc..
Specifications of switch Aruba (HPE) J9727A:
|
PHYSICAL INTERFACES
|
- PoE models:
- 20 (24 ports models) or 44 (48 ports models) RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
- Non-PoE models:
- 20 (24 ports models) or 44 (48 ports models) RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
- All models:
|
|
ADDITIONAL PORTS AND SLOTS
|
- 1 stacking module slot
- 1 dual-personality (RJ-45 or USB micro-B)
- 1 USB 1.1
- 1 RJ-45 out-of-band management port
|
|
POWER SUPPLIES
|
- 1 power supply slot
- 1 minimum power supply required
- Includes:
- 2920-24G (J9726A) & 2920-48G (J9728A):
1 x J9739A (HPE X331 165W 100-240VAC to 12VDC Modular Power Supply)
- 2920-24G-PoE+ (J9727A) & 2920-48G-PoE+ (J9729A):
1 x J9738A (HPE X332 575W 100-240VAC to 54VDC Modular Power Supply)
- 2920-48G-PoE+ 740W (J9836A):
1 x J9737A (HPE X332 1050W 110-240VAC to 54VDC Power Supply)
|
|
MEMORY AND PROCESSOR
|
- Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM
- Packet buffer size: 11.25 MB (6.75 MB dynamic egress + 4.5 MB ingress)
- 1 GB flash
|
|
DIMENSIONS
|
- 2920-24G Switch (J9726A):
- (H) 4.45 cm x (W) 44.25 cm x (D) 33.60 cm (1.75” x 17.42” x 13.23”) (1U height)
- Weight: 11.57 lb (5.25 kg)
- 2920-24G-PoE+ Switch (J9727A):
- (H) 4.39 cm x (W) 44.25 cm x (D) 33.60 cm (1.73” x 17.42” x 13.23”) (1U height)
- Weight: 12.04 lb (5.46 kg)
- 2920-48G Switch (J9728A):
- (H) 4.39 cm x (W) 44.25 cm x (D) 33.60 cm (1.73” x 17.42” x 13.23”) (1U height)
- Weight: 11.95 lb (5.42 kg)
- 2920-48G-PoE+ Switch (J9729A):
- (H) 4.39 cm x (W) 44.25 cm x (D) 33.60 cm (1.73” x 17.42” x 13.23”) (1U height)
- Weight: 12.57 lb (5.7 kg)
- 2920-48G-PoE+ 740W Switch (J9836A):
- (H) 4.39 cm x (W) 44.25 cm x (D) 33.60 cm (1.73” x 17.42” x 13.23”) (1U height)
- Weight: 12.86 lb (5.83 kg)
|
|
PERFORMANCE
|
- IPv6 Ready Certified
- 100 Mb Latency: < 9.0 µs (FIFO 64-byte packets)
- 10 Gbps Latency: < 3.2 µs (FIFO 64-byte packets)
- 24 ports models:
- 1000 Mb Latency: < 3.3 µs (FIFO 64-byte packets)
- Throughput: up to 95.2 Mpps
- Switching capacity: 128 Gbps
- 48 ports models:Routing table size: 2048 entries (IPv4), 256 entries (IPv6)
- 1000 Mb Latency: < 3.2 µs (FIFO 64-byte packets)
- Throughput: up to 130.9 Mpps
- Switching capacity: 176 Gbps
- MAC address table size: 16000 entries
-
|
|
ENVIRONMENTAL
|
- Operating temperature range: 0°C to 55°C (32°F to 131°F)
- Operating relative humidity: 15% to 95%, noncondensing
- Storage temperature range: -40°C to 70°C (-40°F to 158°F)
- Storage humidity: 15% to 95%, non-condensing
- Operating altitude: 10,000 feet (3km)
- Acoustic: See data sheet
|
|
ELECTRICAL CHARACTERISTICS
|
- Frequency: 50/60 Hz
- Voltage: 100 - 240 VAC, rated (depending on power supply chosen)
- Maximum heat dissipation: See data sheet
- Current: See data sheet
- Maximum power rating: See data sheet
- Idle power: See data sheet
- PoE power:
- 2920-24G-PoE+ Switch (J9727A) & 2920-48G-PoE+ Switch (J9729A):
370 W PoE+
- 2920-48G-PoE+ 740W Switch (J9836A):
740 W PoE+
- Notes:
- Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
- For PoE Models only: PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
370 W or 740 W of PoE+ power is available using the internal default power supply (where applicable).
|
|
SAFETY CERTIFICATIONS
|
- CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
|
|
EMISSIONS
|
- FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
|
|
IMMUNITY
|
- EN: EN 55024, CISPR 24
- ESD: IEC 61000-4-2
- Radiated: IEC 61000-4-3
- EFT/Burst: IEC 61000-4-4
- Surge: IEC 61000-4-5
- Conducted: IEC 61000-4-6
- Power frequency magnetic field: IEC 61000-4-8
- Voltage dips and interruptions: IEC 61000-4-11
- Harmonics: IEC 61000-3-2
- Flicker: IEC 61000-3-3
|
|
MANAGEMENT AND MONITORING
|
- Command line interface
- Graphical user interface (Web browser)
- AirWave network platform
- IMC - Intelligent Management Center
- Configuration menu
- Out-of-band management (RJ-45 Ethernet)
- SNMP manager
- Telnet; RMON1; FTP
- In-line and out-of-band;
- Out-of-band management (serial RS-232c or micro usb)
|
Log In