Switch Cisco C9500-24Y4C-A
26319 $
network switches Cisco Catalyst 9500 series protect your organization before, during and after an attack. Reduce the potential attack surface with reliable systems Cisco and encryption MACSEC256. Improve malware detection and threat containment.
Series Catalyst 9500 enables IoT adoption with industry-leading scalability, provides up to 384 ports with up to 60W of power for UPOE, POE+ and PoE, high security, support for AVB protocol and IEEE 1588 standard, service analysis and classification for IoT applications.
Also provide high availability based on partial updates, technology GIR for the secure installation and removal of software and hardware, use mechanisms NSF/SSO, and use high-performance redundant fan and power supply modules. In addition, they support advanced capabilities for routing and providing network services..
Specifications switch Cisco C9500-24Y4C-A:
Datasheet C9500-24Y4C-A |
|
Performance specifications |
|
ASIC |
UADP 3.0 |
Switching capacity |
Up to 2.0 Tbps |
Forwarding rate |
Up to 1 Bpps |
Total number of MAC addresses |
Up to 82,000 |
Total number of IPv4 routes (Address Resolution Protocol [ARP] plus learned routes) |
Up to 256,000 indirect + direct Up to 90,000 host/ARP |
Total number of IPv6 routes |
Up to 256,000 indirect + direct Up to 90,000 host |
Multicast scale |
Up to 32,000 (IPv4 or IPv6) |
QoS ACL scale |
Up to 16000 |
Security ACL scale |
Up to 27000 |
FNF entries |
Up to 256,000 |
DRAM |
16 GB |
Flash |
16 GB |
VLAN IDs |
4094 |
Total Switched Virtual Interfaces (SVIs) |
4000 |
Jumbo frame |
9216 bytes |
Dimensions, physical specifications, weight, and MTBF |
|
Dimensions (H x W x D) |
1.73 x 17.5 x 18.0 in |
Rack Units (RU) |
1 RU |
Chassis with 2 power supplies and built-In fan |
20.99 lb (9.52 kg) |
Input voltage |
90 to 264 VAC |
Operating temperature |
32° to 104°F (0° to 40°C) |
Storage temperature |
-4° to 149°F (-20° to 65°C) |
Relative humidity operating and nonoperating noncondensing |
Ambient (noncondensing) operating: 5% to 90% Ambient (noncondensing) nonoperating and storage: 5% to 95% |
Altitude |
Operation up to 13,000 feet at 40°C |
MTBF (hours) |
336,780 |
Standards |
IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ae for 10G SKU IEEE 802.3ae, IEEE 802.3ba on the 40G SKU IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 |
Safety certifications |
- IEC 60950-1 plus Am1, Am2 Am9, Am10, Am11, Am12 and all deviations and differences - AS/NZS 60950.1.2011 - CAN/CSA-C22.2 No. 60950-1-07 - GB 4943-95 - EN 60950-1; 2006 plus Am1, Am 2, Am9, Am10, Am11, Am12 and all deviations and differences - NOM-019-SCFI-1998 - UL 60950-1, Second Edition |
EMI and EMC compliance |
47 CFR Part 15 Class A CNS13438: 2006 Class A EN 300 386 V1.6.1 EN61000-3-2: 2014 EN61000-3-3: 2013 ICES-003 Issue 6: 2016 Class A KN 32: 2015 Class A TCVN 7189: 2009 Class A EN 55032:2012/ AC:2013 Class A EN 55032:2015 Class A CISPR 32 Edition 2 Class A V-2/2015.04 Class A V-3/2015.04 Class A CISPR24: 2010 + A1: 2015 EN 300 386 V1.6.1 EN55024: 2010 + A1: 2015 KN35: 2015 TCVN 7317: 2003 |
condition | new |
---|
Log In