Switch Cisco IE-3500H-12P2MU2XA
IE3500 Heavy Duty with 2 10G SFP+, 2 mGig UPoE X-Code and 12 GE X-Code interfaces, 240W Power Budget, IP67, Network Advantage
Switches Cisco IE3500 Rugged Series – These are industrial level -managed devices L2/L3, designed for building fault-tolerant networks under high loads and difficult operating conditions. Equipped with a wide range of interfaces, provide high bandwidth and extended traffic protection and control capabilities. Optimally suited for use at industrial automation, energy, transport, as well as in infrastructure with a high degree of distribution.
Switches of this series are made in a strong metal body with passive cooling and meet the industrial standard IP30. Operating temperature range - from -40°C to +75°C, which enables use in facilities with extreme environmental conditions.
Supported technology Power over Ethernet (PoE/PoE+), which allows transmitting power and data over a single cable, reducing cabling infrastructure. The high power budget for the port allows you to use switches to connect energy-intensive devices-IP cameras, access points, sensors and terminals.
Basic technical features:
- Ethernet gigabit ports with auto -determination of speed;
- Modular slots for SFP/SFP+ – Ability to connect fiber -fiber lines;
- Support for channel aggregation (LAG), the excesses and protocols of faucet resistance (STP, RSTP, MSTP);
- Hardware encryption and protection levels: IEEE 802.1X, DHCP Snooping, Dynamic ARP Inspection, MACsec;
- Support for precise time synchronization protocol IEEE 1588 (PTP);
- Extended management capabilities through CLI, SNMP, Web interface and Cisco IOS;
- Compatibility with centralized management and monitoring systems (Cisco DNA, Industrial Network Director).
The IE3500 Model includes modifications with different number of ports (to 24), as well as versions with high resistance to electromagnetic interference certified by standards IEC 61850-3, IEEE 1613 and other sectoral requirements.
The presence of built -in L3 routing functions allows you to use devices as a switching point but also as a network knot with routing between segments.
The series is intended for use in high -load architectures to transmit data - video surveillance, machine vision, automated control, as well as projects with integration EDGE AI and cloud solutions. The switch architecture supports the functions of virtualization required by modern technological process management systems.
Mechanical body strength, vibration protection, voltage and dust jump.
Cisco IE3500 Rugged Series – This is a new generation solution where productivity, safety, scalability and continuity of work are critical.
Specifications of the switch Cisco IE-3500H-12P2MU2XA:
| Parameter | Description |
|---|---|
| Model | Cisco IE‑3500H‑12P2MU2X‑A |
| Series | Cisco Industrial Ethernet 3500 Heavy Duty Series |
| Form Factor | Rugged wall-mount enclosure, IP66/IP67 rated, M12 X‑coded connectors |
| Ports | 12 × 1 Gbps M12 X‑coded (PoE/PoE+ up to 30 W each) 2 × 2.5 Gbps M12 X‑coded (PoE/PoE+/4PPoE up to 60 W each) 2 × 10 Gbps SFP+ fiber uplinks |
| Total PoE Budget | Up to 240 W |
| Switching Performance | Line-rate, wire-speed throughout all ports |
| License Tier | Network Advantage (“‑A” suffix) — full Layer 3 capabilities including MACsec and advanced routing |
| Routing & Security | Supports OSPF, EIGRP, BGP, EVPN/BGP; MACsec; policy-based segmentation |
| TSN Support | IEEE 802.1Qbu and IEEE 802.3br frame preemption supported |
| Resiliency Protocols | MRP, REP, DLR supported (HSR/PRP supported only in IE3505H series) |
| MAC Address Table Capacity | Up to 24,000 entries |
| System Memory (DRAM) | 8 GB |
| Flash Storage | 5.1 GB usable flash |
| SD Card Support | Yes, up to 16 GB |
| VLAN Support | Up to 1,024 active VLANs; supports up to 4,096 VLAN IDs |
| IPv4 Routes | Up to ~7,000 indirect routes |
| IPv6 Routes | Up to ~1,522 indirect routes |
| IGMP Multicast Groups | Up to 1,024 groups supported |
| ACL Capacity | Up to 1,536 combined entries (PACL/VACL/RACL) |
| Spanning Tree Instances | Up to 128 supported instances |
| Jumbo Frame Support | Up to 9,198 bytes (limited to ~2,000 bytes when using ERSPAN, DLR, SGT) |
| Security Features | Secure Boot; TrustSec microsegmentation; Secure Equipment Access; Cisco Cyber Vision |
| Monitoring Tools | Embedded Cisco ThousandEyes agent; SNMP |
| Operating System | Cisco IOS XE |
| Management Options | CLI, Web UI, SNMP; compatible with Catalyst Center and Industrial Network Director |
| Power Input Range | Nominal: 12–48 V DC; Absolute: 9.6–60 V DC |
| Power Redundancy | Dual DC inputs supported |
| Typical Power Consumption | Approx. 30 W (without PoE load under nominal input) |
| Ingress Protection (IP Rating) | IP66/IP67 rated — dust-tight and ingress-protected enclosure |
| Operating Temperature | –40 °C to +75 °C |
| Certifications | Industrial certifications: IEC 61850-3, IEEE 1613, UL Class I Div 2, ATEX Zone 2, EMC compliant |
| Mounting Options | Wall-mounted (brackets included) |
| Dimensions (H × W × D) | Approx. 88 × 152 × 80 mm |
| Weight | Approx. 1.0 kg (without accessories) |
| condition | new |
|---|
Log In