Switch Cisco IE-3500H-14P2T-A
IE3500 Heavy Duty with 14 GE X-Code PoE/PoE+ and 2 GE X-Code M12 interfaces, IP67, Network Advantage
Switches Cisco IE3500 Rugged Series – These are industrial level -managed devices L2/L3, designed for building fault-tolerant networks under high loads and difficult operating conditions. Equipped with a wide range of interfaces, provide high bandwidth and extended traffic protection and control capabilities. Optimally suited for use at industrial automation, energy, transport, as well as in infrastructure with a high degree of distribution.
Switches of this series are made in a strong metal body with passive cooling and meet the industrial standard IP30. Operating temperature range - from -40°C to +75°C, which enables use in facilities with extreme environmental conditions.
Supported technology Power over Ethernet (PoE/PoE+), which allows transmitting power and data over a single cable, reducing cabling infrastructure. The high power budget for the port allows you to use switches to connect energy-intensive devices-IP cameras, access points, sensors and terminals.
Basic technical features:
- Ethernet gigabit ports with auto -determination of speed;
- Modular slots for SFP/SFP+ – Ability to connect fiber -fiber lines;
- Support for channel aggregation (LAG), the excesses and protocols of faucet resistance (STP, RSTP, MSTP);
- Hardware encryption and protection levels: IEEE 802.1X, DHCP Snooping, Dynamic ARP Inspection, MACsec;
- Support for precise time synchronization protocol IEEE 1588 (PTP);
- Extended management capabilities through CLI, SNMP, Web interface and Cisco IOS;
- Compatibility with centralized management and monitoring systems (Cisco DNA, Industrial Network Director).
The IE3500 Model includes modifications with different number of ports (to 24), as well as versions with high resistance to electromagnetic interference certified by standards IEC 61850-3, IEEE 1613 and other sectoral requirements.
The presence of built -in L3 routing functions allows you to use devices as a switching point but also as a network knot with routing between segments.
The series is intended for use in high -load architectures to transmit data - video surveillance, machine vision, automated control, as well as projects with integration EDGE AI and cloud solutions. The switch architecture supports the functions of virtualization required by modern technological process management systems.
Mechanical body strength, vibration protection, voltage and dust jump.
Cisco IE3500 Rugged Series – This is a new generation solution where productivity, safety, scalability and continuity of work are critical.
Specifications of the switch Cisco IE-3500H-14P2T-A:
| Parameter | Description |
|---|---|
| Model | Cisco IE-3500H-14P2T-A |
| Series | Cisco Industrial Ethernet 3500 Heavy Duty Series |
| Form Factor | Rugged IP66/IP67 enclosure, wall-mounted |
| Total Ports | 16 x Gigabit Ethernet ports (M12 X-coded connectors) |
| PoE Ports | 14 x PoE/PoE+ supported ports (up to 30W per port) |
| Total PoE Budget | Up to 240W |
| Switching Performance | Line-rate switching on all ports |
| License Type | Network Advantage (includes advanced Layer 3 features: OSPF, BGP, MACsec) |
| TSN Support | Yes (IEEE 802.1Qbu and IEEE 802.3br compliant) |
| Resiliency | Supports MRP, REP, DLR (no HSR/PRP on this model) |
| MAC Address Table Size | Up to 24,000 entries |
| RAM (DRAM) | 8 GB |
| Flash Memory | 5.1 GB usable space |
| SD Card Support | Yes, up to 16 GB |
| VLANs Supported | Up to 1024 active VLANs, 4096 VLAN IDs |
| IPv4 Routes | Up to 7000 indirect routes |
| IPv6 Routes | Up to 1500 indirect routes |
| IGMP Groups | Up to 1024 groups |
| Access Control Lists (ACLs) | Up to 1536 entries (PACL/VACL/RACL) |
| Spanning Tree Instances | Up to 128 |
| Jumbo Frame Support | Up to 9198 bytes (limited to ~2000 bytes with ERSPAN/SGT/DLR) |
| Security Features | Secure Boot, TrustSec, MACsec, Secure Equipment Access |
| Monitoring & Visibility | Embedded Cisco ThousandEyes agent, SNMP support |
| Operating System | Cisco IOS XE |
| Management Interfaces | CLI, Web UI, SNMP, Cisco Catalyst Center, Industrial Network Director |
| Power Input Range | 12–48 VDC (tolerant: 9.6–60 VDC) |
| Power Redundancy | Dual redundant power inputs |
| Typical Power Consumption | ~30W without PoE load |
| Ingress Protection Rating | IP66/IP67 (dustproof and waterproof enclosure) |
| Operating Temperature | –40 °C to +75 °C |
| Certifications | IEC 61850-3, IEEE 1613, UL Class I Div 2, ATEX Zone 2, EMC industrial standards |
| Mounting Type | Wall-mounted |
| Dimensions (H × W × D) | ~88 × 152 × 80 mm |
| Weight | ~1.0 kg |
| condition | new |
|---|
Log In