Switch Cisco IE-3500H-20FT4T-A
IE3500 Heavy Duty with 20 FE D-code and 4 GE X-Code M12 interfaces, IP67, Network Advantage
Switches Cisco IE3500 Rugged Series – These are industrial level -managed devices L2/L3, designed for building fault-tolerant networks under high loads and difficult operating conditions. Equipped with a wide range of interfaces, provide high bandwidth and extended traffic protection and control capabilities. Optimally suited for use at industrial automation, energy, transport, as well as in infrastructure with a high degree of distribution.
Switches of this series are made in a strong metal body with passive cooling and meet the industrial standard IP30. Operating temperature range - from -40°C to +75°C, which enables use in facilities with extreme environmental conditions.
Supported technology Power over Ethernet (PoE/PoE+), which allows transmitting power and data over a single cable, reducing cabling infrastructure. The high power budget for the port allows you to use switches to connect energy-intensive devices-IP cameras, access points, sensors and terminals.
Basic technical features:
- Ethernet gigabit ports with auto -determination of speed;
- Modular slots for SFP/SFP+ – Ability to connect fiber -fiber lines;
- Support for channel aggregation (LAG), the excesses and protocols of faucet resistance (STP, RSTP, MSTP);
- Hardware encryption and protection levels: IEEE 802.1X, DHCP Snooping, Dynamic ARP Inspection, MACsec;
- Support for precise time synchronization protocol IEEE 1588 (PTP);
- Extended management capabilities through CLI, SNMP, Web interface and Cisco IOS;
- Compatibility with centralized management and monitoring systems (Cisco DNA, Industrial Network Director).
The IE3500 Model includes modifications with different number of ports (to 24), as well as versions with high resistance to electromagnetic interference certified by standards IEC 61850-3, IEEE 1613 and other sectoral requirements.
The presence of built -in L3 routing functions allows you to use devices as a switching point but also as a network knot with routing between segments.
The series is intended for use in high -load architectures to transmit data - video surveillance, machine vision, automated control, as well as projects with integration EDGE AI and cloud solutions. The switch architecture supports the functions of virtualization required by modern technological process management systems.
Mechanical body strength, vibration protection, voltage and dust jump.
Cisco IE3500 Rugged Series – This is a new generation solution where productivity, safety, scalability and continuity of work are critical.
Specifications of the switch Cisco IE-3500H-20FT4T-A:
| Parameter | Description |
|---|---|
| Model | Cisco IE‑3500H‑20FT4T‑A |
| Series | Cisco IE3500 Heavy Duty Series |
| Form Factor | Rugged industrial-grade switch, IP66/IP67 rated enclosure with M12 connectors |
| Total Ethernet Ports | 24 ports total |
| Port Breakdown | 20 × Fast Ethernet (M12 D-coded) + 4 × Gigabit Ethernet (M12 X-coded) |
| PoE Support | No (non‑PoE variant) |
| Switching Capacity | Wire-speed, line-rate switching across all ports |
| MAC Address Table | 24,000 entries |
| System Memory (DRAM) | 8 GB |
| Flash Storage | 5.1 GB onboard flash memory |
| SD Card Slot | Supported, up to 16 GB |
| VLAN Support | Up to 1,024 VLANs active; supports 4,096 VLAN IDs |
| IPv4 Routing Entries | ~7,000 indirect routes |
| IPv6 Routing Entries | ~1,522 indirect routes |
| Multicast Groups (IGMP) | Up to 1,024 snooping groups |
| Access Control Lists (ACLs) | Up to 1,536 entries (combined PACL/VACL/RACL) |
| Spanning Tree Instances | Up to 128 |
| Jumbo Frame Support | Up to 9,198 bytes (approx. 2,000 bytes when using ERSPAN, SGT, DLR) |
| Security Features | Secure Boot, MACsec encryption, TrustSec, Cyber Vision sensor |
| Management Interfaces | CLI, Web GUI, SNMP, Cisco Industrial Network Director, Catalyst Center compatible |
| Operating System | Cisco IOS XE |
| License Tier | Network Advantage (“‑A” suffix) — advanced Layer 3 features, security enhancements |
| Advanced L3 Features | OSPF, EIGRP, BGP, PBR, VRF, MACsec |
| TSN Support | IEEE 802.1Qbu (frame preemption), IEEE 802.3br |
| Industrial Protocols | MRP, REP, DLR |
| Power Input Range | Nominal: 12–48 V DC; Absolute: 9.6–60 V DC |
| Redundant Power Support | Dual DC inputs |
| Typical Power Consumption | Approx. 30 W (non‑PoE, under standard conditions) |
| Environmental Rating | IP66/IP67 — dust-tight and water-resistant (temporary immersion) |
| Operating Temperature Range | −40 °C to +75 °C |
| EMC and Safety Certifications | IEC 61850-3, IEEE 1613, UL Class I Div 2, ATEX Zone 2, EN 61000-6-2, 61000-6-4 |
| Mounting Options | Wall-mount (brackets included) |
| Dimensions (H × W × D) | Approx. 88 × 202 × 80 mm |
| Weight | Approx. 1.5 kg (without accessories) |
| condition | new |
|---|
Log In