Switch Cisco WS-C2960G-24TC-L

Manufacturer:

Cisco

Product ID:

WS-C2960G-24TC-L

Product Description:

Catalyst 2960 24 10/100/1000, 4 T/SFP LAN Base Image

Product Type:

Ethernet Switch

Interfaces/Ports

Total Number of Network Ports:

24

Uplink Port:

Yes

Number of Network (RJ-45) Ports:

20

Port/Expansion Slot Details:

20 x Gigabit Ethernet Network

4 x Gigabit Ethernet Uplink

4 x Fast Ethernet Expansion Slot

Media & Performance

Media Type Supported:

Twisted Pair

Twisted Pair Cable Standard:

Category 5

Ethernet Technology:

Gigabit Ethernet

Network Technology:

10Base-T

10/100/1000Base-T

I/O Expansions

Number of Total Expansion Slots:

4

Expansion Slot Type:

SFP

Shared SFP Slot:

Yes

Number of SFP Slots:

4

Network & Communication

Layer Supported:

2

Management & Protocols

Manageable:

Yes

Management:

• Cisco Network Assistant
• CiscoWorks Support
• Device manager
• Cisco Express Setup
• CiscoView application
• Cisco Network Assistant Software
• Advanced QoS
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
• Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches
• Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches
• Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN
• Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements
• VLAN trunks can be created from any port using standards-based 802.1q tagging
• Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.
• Four thousand VLAN IDs are supported
• Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting
• Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches
• SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
• Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery

Memory

Standard Memory:

64 MB

Memory Technology:

DRAM

Flash Memory:

32 MB

Power Description

Input Voltage:

110 V AC

220 V AC

Power Source:

Power Supply

Redundant Power Supply Supported:

Yes

Physical Characteristics

Height:

1.7"

Width:

17.5"

Depth:

12.9"

Weight (Approximate):

9.92 lb

Miscellaneous

Package Contents:

• Catalyst 2960G-24TC Ethernet Switch
• Catalyst 2960 Switch Getting Started Guide
• Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
• AC power cord
• One RJ-45-to-DB-9 adapter cable
• Four rubber feet for mounting the switch on a table
• Two 19-inch rack-mounting brackets (also used for wall mounting)
• Six Phillips flat-head screws for attaching the brackets to the switch
• Four Phillips machine screws for attaching the brackets to a rack
• One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
• One Redundant Power System (RPS) connector cover (for wall mounting)
• Two Phillips pan-head screws (for attaching the RPS cover)
• Four Phillips truss-head screws (for wall-mounting brackets)

Additional Information:

• LAN Base Image installed
• Each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, 1 port active.
• Configurable up to 8000 MAC addresses
• Configurable up to 255 IGMP groups
• Superior Redundancy for Fault Backup
• Integrated Cisco IOS Software Features for Bandwidth Optimization
• Granular Rate Limiting
• Networkwide Security Features