Family Switches Cisco Catalyst 3560 - is a line of enterprise-class fixed-configuration switches on 8, 24 or 48 ports 10/100/1000 Ethernet + uplink Ports SFP or GbE (There is also aMbported ports - copper 100/1000BASE-T Ethernet or SFP-module for transition to another environment — 1000BASE-SX, 1000BASE-LX, 1000BASE-BX, 1000BASE-ZX, CWDM SFP). They are intended for local networks of small enterprises or remote offices and are excellent for the role of the access network switch.. These access layer switches are ideal for enterprise and branch LAN access. With port support 10/100/1000 Mbit/s and PoE technology, superior performance and investment protection, the devices enable the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, and video remote service points.
The equipment allows you to save the simplicity of traditional switching of local networks and at the same time deploy intelligent network services such as QoS, Data transfer speed limit, access control (ACL), Multifying Management and High Performance IP Routing. Thanks to technology Cisco Express Forwarding (CEF) Series Catalyst 3560 Provides high-performance traffic routing IP. Software SMI supports static, RIPv1 and RIPv2 routing, and EMI - also OSPF, IGRP, EIGRP, as well as routing multicast traffic (PIM, DVMRP, IGMP snooping). Also, Switches Cisco Catalyst 3560 Series support protocol 802.1x, Functionality Identity-Based Networking Services (IBNS), access lists for layer-switched traffic (VLAN ACL), at the third and fourth levels (Router ACL), as well as Port-based ACLs (PACL) and Time-based ACL. Protocols supported for administration security SSH and SNMPv3, as well as centralized authentication on TACACS+ and RADIUS servers. To protect against failures of internal power supplies Switches Catalyst 3560 support redundant power system Cisco Redundant Power System 675 (RPS 675), Protocols 802.1D, 802.1s, 802.1w, Functionality UplinkFast, HSRP, UDLD, Aggressive UDLD, Switch port Auto-recovery.
Switches Cisco Catalyst 3560 available in two versions IOS: in the base (IP Base Image) and extended (IP Services Image) option. Base IOS (SMI) includes extended support QoS, access lists, static and protocol routing capability RIP. extended IOS (EMI) in addition to functionality SMI also provides advanced enterprise-class functionality, including hardware-based unicast routing (unicast) and multicast (multicast) IP traffic, PBR, protocol WCCP.
Specifications of switch Cisco WS-C3560V2-48PS-E:
|
Manufacturer:
|
Cisco
|
|
Product ID:
|
WS-C3560V2-48PS-E
|
|
Product Description:
|
Catalyst 3560V2 48 10/100 PoE + 4 SFP + IPS (Enhanced) Image
|
|
Product Type:
|
Layer 3 Switch
|
|
Interfaces/Ports
|
|
Total Number of Network Ports:
|
48
|
|
Number of PoE (RJ-45) Ports:
|
48
|
|
Port/Expansion Slot Details:
|
48 x Fast Ethernet Network
|
|
|
4 x Gigabit Ethernet Expansion Slot
|
|
Media & Performance
|
|
Ethernet Technology:
|
Fast Ethernet
|
|
Network Technology:
|
10/100Base-TX
|
|
I/O Expansions
|
|
Number of Total Expansion Slots:
|
4
|
|
Expansion Slot Type:
|
SFP
|
|
Number of SFP Slots:
|
4
|
|
Network & Communication
|
|
Layer Supported:
|
3
|
|
Management & Protocols
|
|
Manageable:
|
Yes
|
|
Management:
|
- Web Based Management
- Command Line Interface
- Telnet
- SNMP v1/2c/3
- RMON 1/2/3/9
- MIB-II
- DHCP
- IEEE 802.1p QoS
- IEEE 802.1q VLAN
- Cisco Group Management Protocol
- Cisco Network Assistant
- CiscoWorks LAN Management Solution (LMS)
|
|
Memory
|
|
Flash Memory:
|
32 MB
|
|
Power Description
|
|
PoE (RJ-45) Port:
|
Yes
|
|
Input Voltage:
|
110 V AC
|
|
|
220 V AC
|
|
Power Source:
|
Power Supply
|
|
Redundant Power Supply Supported:
|
Yes
|
|
Physical Characteristics
|
|
Compatible Rack Unit:
|
1U
|
|
Form Factor:
|
Rack-mountable
|
|
Height:
|
1.7"
|
|
Width:
|
17.5"
|
|
Depth:
|
11.6"
|
|
Weight (Approximate):
|
11.02 lb
|
|
Miscellaneous
|
|
Additional Information:
|
- Enhanced Image
- Forwarding bandwidth: 32 Gbps
- 370W available for PoE, allowing full 15.4W for up to 24 ports
- Cisco Hot Standby Router Protocol (HSRP)
- Unidirectional Link Detection Protocol (UDLD)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- Equal-cost routing (ECR) provides load balancing and redundancy
- Basic IP unicast routing protocols (static, RIPv1, RIPv2, and EIGRP-Stub)
- IPv6 unicast routing capability (static, RIP, OSPF, and EIGRP)
Security Features:
- IEEE 802.1x
- Multi-authentication (MultiAuth)
- Flexible authentication (FlexAuth)
- Access Control Lists
- SSHv2
|
Log In