Switch Cisco WS-C3650-8X24PD-S
12600 $
Switches Cisco Catalyst 3650 Series - these are stackable, fixed-configuration converged access devices with an integrated wireless controller ASIC and based on a modular operating system IOS XE. Similar ASIC used in platforms Catalyst 3850 and Supervisor 8-E for Catalyst 4500-E. Switches Cisco Catalyst 3650 Provide security policies and quality QoS for traffic of wired and wireless clients, as well as monitoring and optimization of this traffic at the corporate network access level.
To the features of the models Catalyst 3650 can be attributed to a fixed configuration from 24 or 48 ports 10/100/1000 with the possibility of support PoE+ (before 30 W> per port), integrated uplinks 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet or 4 x 10 Gigabit Ethernet with transceiver support SFP and SFP+, Possibility to install up to 2 fault-tolerant AC power supplies of various capacities and 3 cooling fans. Also in Catalyst 3650 there is stack support StackWise (up to 9 devices in a stack) when using optional modules for throughput stacking 160 Gb/with and technology SSO (Stateful SwitchOver), Bandwidth Wireless 40 Gb/with On the base ASIC UADP (Unified Access Data Plane) and operating system IOS XE and support up to 25 access points and 1000 wireless clients per switch 3650 or one stack StackWise from switches 3650.
Switches Cisco Catalyst 3650 available in three software versions Cisco IOS (feature set):
- LAN Base: Enterprise Access Layer 2 Switching;
- IP Base: Enterprise Access Layer 3 Switching;
- IP Services: Advanced Layer 3 Switching (IPv4 and IPv6).
Specifications of switch Cisco WS-C3650-8X24PD-S:
|
Device Type |
Switch - 24 ports - L3 - Managed - stackable |
|
Enclosure Type |
Desktop, rack-mountable 1U |
|
Subtype |
Gigabit Ethernet |
|
Ports |
16 x 10/100/1000 (UPOE) + 8 x 100/1000/2.5G/5G/10G (UPOE) + 2 x 10 Gigabit SFP+ (uplink) |
|
Power Over Ethernet (PoE) |
PoE+ |
|
Performance |
Switching capacity: 272 Gbps |
|
Capacity |
IPv4 routes: 24000 |
|
MAC Address Table Size |
32000 entries |
|
Jumbo Frame Support |
9198 bytes |
|
Routing Protocol |
BGP-4, IS-IS, RIP-1, RIP-2, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng |
|
Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
|
Authentication Method |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
Features |
Full duplex capability, Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Strict Priority Queuing (SPQ), Class of Service (CoS), Flexible NetFlow (FNF), DiffServ Code Point (DSCP) support |
|
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at |
|
RAM |
4 GB |
|
Flash Memory |
4 GB |
|
Status Indicators |
Port transmission speed, port duplex mode, system, active, status, PoE |
|
Expansion / Connectivity |
|
|
Interfaces |
16 x 1000Base-T RJ-45 PoE+ |
|
Expansion Slots |
1 (total) / 1 (free) x Stacking Module |
|
Power |
|
|
Power Device |
Internal power supply - hot-plug |
|
Installed Qty |
1 (installed) / 2 (max) |
|
Power Redundancy |
Optional |
|
Power Redundancy Scheme |
1+1 (with optional power supply) |
|
Power Provided |
715 Watt |
|
Voltage Required |
AC 120/230 V (50/60 Hz) |
|
Miscellaneous |
|
|
Rack Mounting Kit |
Included |
|
MTBF |
233,780 hours |
|
Compliant Standards |
CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A |
|
Software / System Requirements |
|
|
Software Included |
Cisco IOS IP Base |
|
Dimensions & Weight |
|
|
Width |
44.5 cm |
|
Depth |
48.6 cm |
|
Height |
4.4 cm |
|
Weight |
7.5 kg |
|
Manufacturer Warranty |
|
|
Service & Support |
Limited warranty - replacement - lifetime - response time: next business day |
|
Environmental Parameters |
|
|
Min Operating Temperature |
-5 °C |
|
Max Operating Temperature |
45 °C |
|
Humidity Range Operating |
5 - 96% (non-condensing) |
|
Min Storage Temperature |
-40 °C |
|
Max Storage Temperature |
70 °C |
| condition | new |
|---|
Log In