Switch Dell EMC N3132PX-ON
8000 $
SwitchesВ Dell EMC Power Switch Series N3000 1GbEВ third level.
Switches from the seriesВ Dell Networking N3000В designed to increase the nominal speed of network connections. The increase occurs due to the thoughtful configuration. With helpВ Dell N3024 and N3048В the network is being upgraded with the distribution of the third level and supportВ PoE+. Aggregation of network protocols is carried out simultaneously on several chassis and dockingВ 12 modules. Commutator distributor seriesВ N3000В focused on solving your problems in terms of management.
Pick upВ Dell NetworkingВ worth and to guarantee savings. Switches of this series can work at high temperatures up to 50 degrees Celsius, which will allow you to significantly reduce the cost of cooling. This functionality has an impact on the cost of using switches in your favor.
High performance coupled with capacity to handle bursty workloads make the Dell Networking Series Switches the best choice for expanding networksВ GbE. This is due to the need for systematic deployment, high concentration of aggregation and openness..
Switch ModelsВ Dell Power Switch have 48 portsВ powered modificationВ PoE+В without the need to connect an external power source, which makes it possible to connect a device with power quality requirements, while there is no need to use a separate cable. This technology is very useful in buildings of old construction, which will reduce the cost of laying power to remote necessary facilities..
Specifications of switchВ Dell EMC N3132PX-ON:
|
Switching network bandwidth (full duplex mode) |
328В Gbit/with |
|
transmission speed |
428В million packages/with |
|
CPU memory |
2 Gbyte |
|
Flash memory |
512В Mbyte |
|
Packet Buffer Memory |
5В Mbyte |
|
Integrated ports for stacking Mini-SAS on the back |
2В xВ 21В Gbit/with |
|
Maximum stacking distance (in meters) |
3 |
|
Maximum stacking speed (full duplex mode) |
84В Gbit/with (An optional module is required to combine stack) |
|
Dual Port Uplink Module BASE-T RJ-45 10В Gbit/with hot-swappable |
Not available |
|
Dual Port Uplink Module SFP+ 10В Gbit/with hot-swappable |
Not available |
|
Dual Port Module QSFP+ 40В Gbit/with hot-swappable |
Optional |
|
Stacking Module |
Optional |
|
200W hot-swappable power supplies using V-Lock provide redundancy on unsupported switches PoE |
Not available |
|
Hot-swappable 715W power supplies provide redundancy or power to all ports PoE+ |
Not available |
|
Power supplies 1В 100В W, hot-swappable, provides redundancy or power to all ports PoE+ |
Optional |
|
Port SpecificationsВ 1GbE |
24В fixed port (1В Gbit/with, 100В Mbit/s, 10В Mbit/s) |
|
Built-in ports 2,5/5GbE RJ-45 |
Eight fixed portsВ RJ-45 with PoE support 60W |
|
Built-in dedicated ports 10GbEВ SFP+ |
4 |
|
Built-inMbported ports GbE SFP |
Not available |
|
Built-inMbported ports GbE 10/100/1000BASE-T RJ-45 |
Not available |
|
Power by technology support PoE+ |
as standard |
|
60W PoE support |
as standard |
|
Maximum power per port when powered by technology PoE |
60В watts per 32 ports (may need a second block |
|
Dimensions in mm (H x W x D) |
434В xВ 407В xВ 43,5 |
|
Approximate weight in kilograms (without modules) |
7,12 |
|
power unit (Tue) |
2 ON 1В 100 |
|
Maximum heat dissipation (Btu/h) |
7В 216,68 |
|
Maximum power consumption (Tue) |
2В 115 |
| condition | new |
|---|
Log In