|
Dell EMC PowerSwitch S5212F-ON
|
Modernize Computing, Storage, and Interaction HCI with this half-width switch 1RU ToR
12 ports x25GbE SFP28 and 3 ports x100GbE QFSP28
supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.
|
|
Dell EMC PowerSwitch S5224F-ON
|
Optimize connectivity, cost and performance with this switch ToR, which has 24 ports X 25GbE SFP28 and 4 ports X 100GbE QSFP28. S5224F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.
|
|
Dell EMC PowerSwitch S5232F-ON
|
32 port 100GbE QSFP28
S5232F-ON also supports Open Network Install Environment (ONIE) to install zero-touch network operating systems.
|
|
Dell EMC PowerSwitch S5248F-ON
|
Optimal flexibility and cost-effectiveness for complex computing and traffic storage environments
48 ports X 25GbE SFP28, 4 port X 100GbE QSFP28 and 2 ports x 100GbE QFSP28-DD.
S5248F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.
|
|
Dell EMC PowerSwitch S5296F-ON
|
Double the number of direct ports 25GBE using a switch ToR
96 ports X 25GbE SFP28 and 8 ports X 100GbE QSFP28.
S5296F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.
|
|
routing
|
Full-featured switching and routing of the second and third layers
|
|
VLAN
|
Network tags VLAN, GVRP
|
|
Other switching options
|
Open Networking
|
|
Control
|
Command line interface
SNMP
Interfaces REST API
|
|
Supported standards
|
IEEE — 802.1, 802.3
RFC — IP, IPv4, IPv6, RIP, OSPF, IS-IS, BGP, multicast race Lka, safety, Data Center Bridging, Network management
|
|
Operating conditions
|
Operating temperature: from 0 to 45 В°C (from 32 to 113 В°F)
Operating Humidity: from 10 to 85% (relative humidity), non-condensing
|
|
Nutrition
|
100–240 V AC, 50/60 Hz
|
|
Interference immunity
|
EN 300 386 V1.4.1:2008 "EMC for network equipment", EN 55024:1988 + A1:2001 + A2:2003, EN 61000-3-2 "Sinusoidal current emission limits", EN 61000-3-3 "Limitation of voltage ripple and flicker", EN 61000-4-2 "Electrostatic discharge immunity test", EN 61000-4-3 "RF electromagnetic field immunity", EN 61000-4-4 Immunity test for fast transients and bursts, EN 61000-4-5 Immunity test for surge voltage, EN 61000-4-6 Immunity to conducted disturbances induced by radio frequency electromagnetic fields".
|
|
RoHS
|
All components of the series S comply with the directive RoHS EU
|
|
radiation/Security
|
Security
W>second edition UL/CSA 60950-L, second edition EN 60950-1 second edition IEC 60950-1, including all national standard deviations and group differences, EN 60825-1 "Safety of laser products. part 1. Equipment classification, requirements and user manual", EN 60825-2 "Safety of laser devices. part 2. Safety of fiber-optic communication systems", requirements FDA 21 CFR 1040.10 and 1040.11
radiation
Australia/New Zealand: ASNZS CISPR 22:2006, m, Class A; Canada: ICES-003, issue 4, class A; Europe: EN 55022:2006 + A1:2007 (CISPR 22:2006), Class A; Japan: VCCI V3/2009 Class A
|
Log In